Signals and Image Characterization of Titanium Thick Welds Based on Ultrasonic Phased Array
摘 要
使用超声相控阵技术检测了钛合金厚板焊缝中的典型缺陷,分析各种典型缺陷的扫描图像特征,总结相控阵技术对缺陷的定性方法,并与常规超声检测方法进行比较。结果表明,结合A扫描和S扫描,相控阵检测方法能够有效对厚板焊缝缺陷进行识别、定位和定量。检测灵敏度和检测效率较A扫描得到大大提高。
Abstract
Ultrasonic phased array(PA) technology was used to detect defects in titanium welds. The scanning images of some typical defects were analyzed. The results showed that by the combination of A scan signals and S scan images, the PA could detect the defects effectively in discriminating, sizing and locating. The inspection sensitivity and efficiency were superior to those of A scan.
中图分类号 TG115.28
所属栏目 2008远东无损检测新技术论坛优秀论文选登
基金项目 江西省教育厅重点实验室(CB200608010)
收稿日期 2008/6/25
修改稿日期
网络出版日期
作者单位点击查看
备注危荃(1984-),女,硕士研究生,主要从事声学检测。
引用该论文: WEI Quan,WU Guan-Hua,WU Wei,ZHONG De-Huang. Signals and Image Characterization of Titanium Thick Welds Based on Ultrasonic Phased Array[J]. Nondestructive Testing, 2008, 30(8): 540~542
危荃,邬冠华,吴伟,钟德煌. 钛合金厚板焊缝超声相控阵信号和图像的特征与识别[J]. 无损检测, 2008, 30(8): 540~542
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】张旭.钛合金材料焊接工艺和质量控制的探讨\[J\].化工设备与管道,2002,39(4):59-62.
【2】王铮,卢超,邬冠华,等.舰船钛合金超声检测信号模型及模极大值小波去噪算法分析\[J\].舰船科学技术,2005,27(3):67-71.
【3】Friedl J H, Gray T A, Khandelwal P. Ultrasonic phased array inspection of seeded titanium billet\[J\]. Review of Progress in Quantitive Nondestructive Evaluation,2004,23:809-816.
【4】Utrata D, Clark R. Groundwork for rail flaw detection using ultrasonic phased array inspection\[J\]. Review of Progress in Quantitative Nondestructive Evaluation,2003,22:799-805.
【5】ASTM E1961—1998聚焦探头区域识别技术的环焊缝机械化超声检测标准\[S\].
【2】王铮,卢超,邬冠华,等.舰船钛合金超声检测信号模型及模极大值小波去噪算法分析\[J\].舰船科学技术,2005,27(3):67-71.
【3】Friedl J H, Gray T A, Khandelwal P. Ultrasonic phased array inspection of seeded titanium billet\[J\]. Review of Progress in Quantitive Nondestructive Evaluation,2004,23:809-816.
【4】Utrata D, Clark R. Groundwork for rail flaw detection using ultrasonic phased array inspection\[J\]. Review of Progress in Quantitative Nondestructive Evaluation,2003,22:799-805.
【5】ASTM E1961—1998聚焦探头区域识别技术的环焊缝机械化超声检测标准\[S\].
相关信息