扫一扫 加微信
首页 > 期刊论文 > 论文摘要
脉冲激励远场涡流管道检测技术的有限元仿真
          
Finite Element Simulation on Ferromagnetic Tubes Testing Using Pulsed Remote Field Eddy Current Technique

摘    要
研究了脉冲激励下的远场涡流管道检测技术,采用有限元仿真的方法对检测系统参数对检测结果的影响做了详细的分析。表明该技术将远场涡流和脉冲激励的优势有效结合,能提取较多检测信息,可同时测量管道内径和内、外壁缺陷信息,且具有信号幅值高,功耗低的优点。
标    签 远场涡流检测技术   脉冲激励   管道   有限元仿真   Remote eddy current testing technique   Pulse excitation   Tube   Finite element simulation  
 
Abstract
Testing of ferromagnetic tube using pulsed remote field eddy current technique was researched. The finite element method was used to make detailed analysis of the effects on variations of the parameters of the detection system. Results showed that this technique combined advantages of remote field eddy current and pulsed excitation effectively, and that it could not only collect more detection information, including measurements of inner diameter of tubes, internal defects and external defects, but also had the strengths of high signal amplitude and lower power consumption.

中图分类号 TG115.28

 
  中国光学期刊网论文下载说明


所属栏目 科研成果与学术交流

基金项目

收稿日期 2007/11/7

修改稿日期

网络出版日期

作者单位点击查看

备注李学超(1982-),男,硕士研究生,研究方向为无损检测。

引用该论文: Li Xue-Chao,FENG En-Xin. Finite Element Simulation on Ferromagnetic Tubes Testing Using Pulsed Remote Field Eddy Current Technique[J]. Nondestructive Testing, 2008, 30(9): 586~589
李学超,冯恩信. 脉冲激励远场涡流管道检测技术的有限元仿真[J]. 无损检测, 2008, 30(9): 586~589


论文评价
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
分享论文
分享到新浪微博 分享到腾讯微博 分享到人人网 分享到 Google Reader 分享到百度搜藏分享到Twitter

参考文献
【1】Atherton D L. Remote field eddy current inspection[J]. IEEE Transactions on Magnetics,1995,31(6):4142 - 4147.
 
【2】Minxing Qu, Meijuan Chen, Yang Zhao. Efforts towards gaining a better understanding of the remote field[J]. IEEE Transaction on Magnetics,1996,32(3):1589-1592.
 
【3】赵阳,陈美娟,曲民兴.远场涡流三维缺损响应的仿真研究[J].应用科学学报,1997,15(2):198-204.
 
【4】邢丽冬,曲民兴.远场涡流技术检测带翼片管的研究[J].无损检测,2004,26(11):554-557.
 
【5】徐平,罗飞路,张玉华,等.基于脉冲涡流检测技术的缺陷定量检测研究[J].工业计量,2006,16(2):6-10.
 
【6】邢丽东,于盛林,曲民兴.三维远场涡流探头的设计与实验研究[J].仪器仪表学报,2006,27(11):1529-1534.
 
【7】Dai X W, Ludwig R, Palanisamy R. Numerical simulation of pulsed eddy-current nondestructive testing phenomena[J]. IEEE Transaction on Magnetics,1990,26(6):3089-3096.
 
【8】Bowler J, Johnson M. Pulsed eddy-current response to a conducting half-space[J]. IEEE Transaction on Magnetics,1997,33(3):2258-2264.
 
【9】Cardelli E, Faba A, Tomassini M. FEM time domain analysis for the detection of depth and thickness of cylindrical defects in metallic plates[J]. IEEE Transaction on Magnetics,2005,41(5):1616-1619.
 
【10】Ambru D, Bilas V, Vasicc′ D. Inspection Tool for Harsh Environment Operation Utilizing Pulsed Remote Field Technique[C]. Instrumentation and Measurement Technology Conference. Ottawa,Canada:2005:17-19.
 
相关信息
   标题 相关频次
 6061-T6铝合金MIG焊接头微区拉伸性能表征及接头拉伸性能的有限元仿真
 2
 Inconel 625镍基合金管道焊接残余应力的数值模拟
 2
 采用导波杆方式超声检测高温高压管道壁厚的方法
 2
 采用轨道复合绝缘技术的城市轨道交通杂散电流防护研究
 2
 储罐大角焊缝漏磁场仿真模拟与分析
 2
 磁测应力传感器的有限元仿真
 2
 磁声发射励磁器的仿真分析
 2
 带保温层管道腐蚀缺陷的脉冲涡流检测技术仿真
 2
 飞机关键部件结冰的超声导波探测
 2
 复合泡沫塑料承压件冲击破碎的仿真模拟与试验
 2
 管道的相控阵超声高频导波检测
 2
 管道高温定点测厚技术
 2
 管道沟槽状腐蚀缺陷的有限元仿真分析
 2
 管道漏磁检测器的磁路优化
 2
 厚壁联箱及管道的超声波检测
 2
 基于MBN的便携式RPV钢辐照脆化检测系统设计
 2
 基于磁场测量的脉冲远场涡流检测双层套管仿真
 2
 基于数字散斑相关技术与有限元仿真相结合方法研究0Cr18Ni9不锈钢的断裂行为
 2
 激光错位散斑检测结果的影响因素
 2
 金属柱状体内部缺陷的超声检测及重构
 2
 脉冲扰动电磁场检测非表面缺陷埋深的识别算法
 2
 脉冲涡流检测激励参数和激励线圈参数的优化设计
 2
 脉冲涡流检测中传感器空间位置变化对检测结果影响规律的仿真分析
 2
 汽轮机叶片叶身的涡流检测
 2
 铁磁性材料的脉冲涡流测厚与特征量提取
 2
 温度对电磁超声Lamb波检测信号的影响
 2
 新型复合励磁法漏磁检测有限元仿真与试验
 2
 压力管道声发射检测缺陷定位仿真及验证
 2
 远场涡流探头改进的有限元仿真
 2
 铸件裂纹产生原因分析
 2