搜索热:失效分析 陶瓷
扫一扫 加微信
首页 > 期刊论文 > 论文摘要
脉冲涡流检测技术的研究进展和展望
          
Research of Pulsed Eddy Current Testing Technology

摘    要
飞机多层结构中缺陷的检测是目前航空领域无损检测的难点。脉冲涡流检测技术近年来在航空无损检测领域得到了广泛的重视和应用。综述了国内外科研机构在脉冲涡流技术的工程应用、理论计算、缺陷成像以及缺陷识别方法方面的研究进展。指出了脉冲涡流检测技术的发展趋势以及今后的研究热点。
标    签 脉冲涡流检测   航空领域   研究进展   Pulsed eddy current testing   Aviation field   Research development  
 
Abstract
The flaw detection of multi-layered structures of aircraft fuselage lap splices is still a difficulty to the aviation industry. Pulsed eddy current testing technique received recognition and application in aviation industry. The recent research advances of research institute in China, abroad are reviewed including the engineering application, theoretical calculation, defect imaging and defect recognition. The developing trend of pulsed eddy current testing technique and its hot research aspects were pointed out.

中图分类号 TG115.28

 
  中国光学期刊网论文下载说明


所属栏目 综 述

基金项目 国家科技支撑计划资助项目(2006BAK02B02)

收稿日期 2007/12/21

修改稿日期

网络出版日期

作者单位点击查看

备注余付平(1983-),女,硕士研究生,主要从事测试计量技术及仪器研究。

引用该论文: YU Fu-Ping,ZHU Rong-Xin,WANG Yun-Jiang,LI Bin,DING Ke-Qin. Research of Pulsed Eddy Current Testing Technology[J]. Nondestructive Testing, 2008, 30(11): 842~846
余付平,朱荣新,王韫江,李 斌,丁克勤. 脉冲涡流检测技术的研究进展和展望[J]. 无损检测, 2008, 30(11): 842~846


被引情况:


【1】张 雯,雷银照, "平板导体上方倾斜圆形线圈的瞬态涡流场",无损检测 32, 871-876(2010)



论文评价
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
分享论文
分享到新浪微博 分享到腾讯微博 分享到人人网 分享到 Google Reader 分享到百度搜藏分享到Twitter

参考文献
【1】Fisher J L, Beissner R E. Pulsed eddy current crack characterization experiments[J]. Review of Progress in QNDE,1985,(5A):199-206.
 
【2】Lebrun B, Jayet Y, Baboux J C. Pulsed eddy current application to the detection of deep cracks[J]. Material Evaluation,1995,(10):1296-1300.
 
【3】Lebrun B, Jayet Y, Baboux J C. Pulsed eddy current signal analysis: application to the experimental detection and characteriza-tion of deep flaws in highly conductive materials[J]. NDT&E Internation,1997,30(3):163-170.
 
【4】Tai C C, Rose J H, Moulder J C. Thickness and conductivity of metallic layers from pulsed eddy current measurements[J]. Rev Sci Instrum,1996,67(11):3965-3972.
 
【5】Yang H C, Tai C C. Pulsed eddy current measurement of a conducting coating on a magnetic metal plate[J]. Meas Sci Technol,2002,(13):1259-1265.
 
【6】Bieber J A, Shaligram S K, Rose J H, et al. Time-gating of pulsed eddy current signals for defect characterization and discrimination in aircraft lap-joints[J]. Review of Progress in QNDE,1997,(16B):1915-1921.
 
【7】Moulder J C, Bieber J A. Pulsed eddy current measurements of corrosion and cracking in aging aircraft[C]. Materials Research Society Symposium Proceedings of Nondestructive Characterization of Materials in Aging Systems. Shanghai: 1998.
 
【8】Plotnikov Y A, Nath S C, Rose C W. Defect characterization in multi-layered conductive components with pulsed eddy current[J]. Review of Progress in QNDE,2002,(21A):1976-1983.
 
【9】Lepine B A, Wallace B P, Forsyth D S, et al. Pulsed eddy current method developments for hidden corrosion detection in aircraft structures[C]. PACNDT, Shanghai: 1998.
 
【10】Smith R A, Hugo G R. Deep corrosion and crack detection in aging aircraft using transient eddy current NDE[J]. Review of Progress in Quantitative NDE,1999:1401-1408.
 
【11】Sophian A, Tian G Y, Taylor D, et al. Design of a pulsed eddy current sensor for detection of defects in aircraft lap-joints[J]. Sensors and Actuators A,2002,101(1):92-98.
 
【12】Sophian A, Tian G Y, Zairi S. Pulsed magnetic flux leakage techniques for crack detection and characterization[J]. Sendors and Actuators A,2006,(125):186-191.
 
【13】Tai C C, Yang H C, Liang D S. Pulsed eddy current for metal surface cracks inspection:Theory and experiment[J]. Review of Progresss in QNDE, 2002,21A&B:388-395.
 
【14】王春艳,陈铁群,张欣宇.脉冲涡流检测技术的某些进展[J].无损探伤,2005,29(4):1-4.
 
【15】叶子郁,朱目成.应用脉冲涡流检测金属表面裂纹的研究[J].计量技术,2005,(10):16-18.
 
【16】杨宾峰,罗飞路,张玉华,等.飞机多层结构中裂纹的定量检测及分类识别[J].机械工程学报,2006,42(2):63-67.
 
【17】游凤荷,蒋韬,孙砚飞.脉冲涡流磁场特征分析[J].仪表技术与传感器,2003,(5):38-40.
 
【18】刘世杭,过玉清.脉冲涡流感应测量方法的研究[J].东华大学学报·自然科学版,2001,27(6):49-52.
 
【19】Bowler J, Johnson M. Pulsed eddy current response to a conducting half space[J]. IEEE Transactions on Magnetics,1997,33(3):2258-2264.
 
【20】Ludwig R, Dai X W. Numerical and analytical modeling of pulsed eddy currents in a conducting half-space[J]. IEEE Transactions on Magnetics,1990,26(1):299-307.
 
【21】Tanaka M, Tsuboi H, Kobayashi F, et al. Transient eddy current analysis by the boundary element method using fourier transforms[J]. IEEE Transactions on Magnetics,1993,29(2):1722-1725.
 
【22】Pavo J. Numerical calculation method for pulsed eddy current testing[J]. IEEE Transactions on Magnetics,2002,38(2):1169-1172.
 
【23】Xuan L, Shanker B, Zeng Z, et al. Element-free galerkin method in pulsed eddy currents[J]. International Journal of Applied Electromagnetics and Mechanics,2004,19(1-4):463-466.
 
【24】Yioultsis T V. Explicit finite difference time domain method with perfectly matched layers for transient low frequency eddy current analysis[J]. IEEE Transactions on Magnetics,2002,38(5):3439-3447.
 
【25】雷银照,熊华俊,王书彬.线性瞬态涡流场定解问题中的法向边界条件与解的唯一性[J].中国电机工程学报,2003,23(4):81-85.
 
【26】幸玲玲,王恩荣.脉冲涡流检测中系统冲激响应的快速计算[J].中国电机工程学报,2005,25(20):147.
 
【27】Panaitov G, Krause H J, Zhang Y. Pulsed eddy current technique with HTS SQUID magnetometer for nondestructive evaluation[J]. Physica C,2002,372(1):278.
 
【28】Moulder J C, Bieber J A, Ward W W, et al. Scanned pulsed eddy current instrument for nondestructive inspection of aging aircraft[J]. Proceedings of SPIE - The International Society for Optical Engineering,1996,2945:2-13.
 
【29】Tian G Y, Sophian A. Defect classification using a new feature for pulsed eddy current sensors[J]. NDT&E International,2005,(38):77-82.
 
【30】金建华.基于磁性传感器信息融合的油管损伤在线检测技术与系统[J].武汉:华中科技大学学报,2001.
 
相关信息
   标题 相关频次
 管道腐蚀检测中新型脉冲涡流传感器的设计
 10
 基于位置交叉点的脉冲涡流缺陷定量检测技术
 6
 脉冲涡流检测中传感器空间位置变化对检测结果影响规律的仿真分析
 6
 基于脉冲漏磁理论的带保温层管道腐蚀缺陷定量分析技术
 4
 基于频谱分析的脉冲涡流检测提离消除技术
 4
 带保温层管道腐蚀缺陷的脉冲涡流检测技术仿真
 3
 便携式DR与CR成像技术在焊缝检测中的应用
 2
 长输管道沉降变形分布式监测方法
 2
 电站锅炉不锈钢管氧化皮检测技术
 2
 钢腐蚀脉冲涡流检测系统的研制与应用
 2
 工业射线视频成像的噪声抑制方法
 2
 管-管板焊接接头射线数字成像自动检测系统设计
 2
 管子-管板焊接接头射线数字成像自动检测系统
 2
 基于LabVIEW的脉冲涡流检测系统
 2
 基于非本征型光纤传输声发射局部损伤监测系统
 2
 基于固态磁场传感器的脉冲涡流检测铁磁性构件腐蚀缺陷
 2
 基于频谱特征的淬硬层深度脉冲涡流检测仿真分析与试验
 2
 基于系统辨识的脉冲涡流信号提离效应
 2
 基于线阵探测器的X和γ射线角焊缝检测试验分析
 2
 激励参数和试件电磁参数对脉冲涡流检测影响的仿真分析
 2
 客运架空索道无损检测技术
 2
 联合时频分析在脉冲涡流信号识别中的应用
 2
 脉冲涡流测厚技术
 2
 脉冲涡流检测激励参数和激励线圈参数的优化设计
 2
 脉冲涡流检测技术的进展
 2
 脉冲涡流检测技术的研究
 2
 脉冲涡流检测系统影响因素分析
 2
 脉冲涡流圆柱型探头参数的优化设计
 2
 脉冲涡流阵列缺陷成像检测技术
 2
 平面焊接残余应力九极磁测探头仿真分析
 2