建筑铝合金型材耐磨性测试方法
Abrasion Resistance Test Method of Architectural Aluminum Alloy Profile
摘 要
总结了国内外常用的建筑铝合金型材耐磨性试验方法及其所采用的标准，分析讨论了其特点，并对相关标准的异同进行了比较。结果表明: GB 5237-2008规定采用落砂试验法,但该方法有多方面的不足;而喷砂试验仪法、轮磨试验仪法和Taber试验法在实践中应用较少，需要继续研究。
耐磨性
试验方法
标准
aluminum alloy profile
abrasion resistance
test method
standard
Abstract
The common abrasion resistance test methods and the correlative standards for architectural aluminum alloy profile were summarized. And the differences between different methods were analyzed. The results showed that the shakeout method was used in GB 5237-2008, but the method had some shortcoming; the abrasion blasting method, wheel abrasion machine method and Taber test method were all used in practice infrequently, so the methods should be researched continuously.
中图分类号 O794 TG146.2+1
所属栏目 综述
基金项目 科技部“科学仪器设备升级改造专项”资助项目(2006SJ166300)
收稿日期 2009/5/8
修改稿日期
网络出版日期
作者单位点击查看
备注纪 红(1978-),女,高级工程师,工学博士。
引用该论文: JI Hong,SUN Feng-xian,LI Yong-feng. Abrasion Resistance Test Method of Architectural Aluminum Alloy Profile[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2010, 46(3): 180～182
纪 红,孙凤仙,李永丰. 建筑铝合金型材耐磨性测试方法[J]. 理化检验－物理分册, 2010, 46(3): 180～182
共有人对该论文发表了看法，其中：
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】GB 5237-2008 铝合金建筑型材[S]．
【2】JIS H 8682-3-1999 Test Methods for Abrasion Resistance of Anodic Oxide Coatings on Aluminium and Aluminium Alloys Part 3: Sand-falling Abrasion Resistance Test[S]．
【3】ASTM D968-2001 Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive[S]．
【4】GB/T 12967.1-2008 铝及铝合金阳极氧化 用喷磨试验仪测定阳极氧化膜的平均耐磨性[S]．
【5】ISO 8252-1987 Anodized Aluminium and Aluminium Alloys; Measurement of Mean Specific Abrasion Resistance of Anodic Oxidation Coatings with an Abrasive Jet Test Apparatus[S]．
【6】EN 12373-10:1998 Aluminium and Aluminium Alloys Anodizing Part10: Measurement of Mean Specific Abrasion Resistance of Anodic Oxidation Coatings Using an Abrasive Jet Test Apparatus[S]．
【7】JIS H 8682-2:1999 Test Methods for Abrasion Resistance of Anodic Oxide Coatings on Aluminium and Aluminium Alloys Part 2: Abrasive Jet Test[S]．
【8】GB/T 12967.2-2008 铝及铝合金阳极氧化 用轮式磨损试验仪测定阳极氧化膜的耐磨性和磨损系数[S]．
【9】ISO 8251-1987 Anodized Aluminium and Aluminium Alloys; Measurement of Wear Resistance and Wear Index of Anodic Oxidation Coatings with an Abrasive Wheel Wear Test Apparatus[S]．
【10】EN 12373-9:1998 Aluminium and Aluminium Alloys Anodizing Part 9: Measurement of Wear Resistance and Wear index of Anodic Oxidation Coatings Using an Abrasive Wheel Wear Test Apparatus[S]．
【11】JIS H 8682-1:1999 Test Methods for Abrasion Resistance of Anodic Oxide Coatings on Aluminium and Aluminium Alloys Part 1: Wheel Wear Test[S]．
【12】ASTM D4060 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser[S]．
【13】GB/T 1768-2006 色漆和清漆 耐磨性的测定 旋转橡胶砂轮法[S] ．
【2】JIS H 8682-3-1999 Test Methods for Abrasion Resistance of Anodic Oxide Coatings on Aluminium and Aluminium Alloys Part 3: Sand-falling Abrasion Resistance Test[S]．
【3】ASTM D968-2001 Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive[S]．
【4】GB/T 12967.1-2008 铝及铝合金阳极氧化 用喷磨试验仪测定阳极氧化膜的平均耐磨性[S]．
【5】ISO 8252-1987 Anodized Aluminium and Aluminium Alloys; Measurement of Mean Specific Abrasion Resistance of Anodic Oxidation Coatings with an Abrasive Jet Test Apparatus[S]．
【6】EN 12373-10:1998 Aluminium and Aluminium Alloys Anodizing Part10: Measurement of Mean Specific Abrasion Resistance of Anodic Oxidation Coatings Using an Abrasive Jet Test Apparatus[S]．
【7】JIS H 8682-2:1999 Test Methods for Abrasion Resistance of Anodic Oxide Coatings on Aluminium and Aluminium Alloys Part 2: Abrasive Jet Test[S]．
【8】GB/T 12967.2-2008 铝及铝合金阳极氧化 用轮式磨损试验仪测定阳极氧化膜的耐磨性和磨损系数[S]．
【9】ISO 8251-1987 Anodized Aluminium and Aluminium Alloys; Measurement of Wear Resistance and Wear Index of Anodic Oxidation Coatings with an Abrasive Wheel Wear Test Apparatus[S]．
【10】EN 12373-9:1998 Aluminium and Aluminium Alloys Anodizing Part 9: Measurement of Wear Resistance and Wear index of Anodic Oxidation Coatings Using an Abrasive Wheel Wear Test Apparatus[S]．
【11】JIS H 8682-1:1999 Test Methods for Abrasion Resistance of Anodic Oxide Coatings on Aluminium and Aluminium Alloys Part 1: Wheel Wear Test[S]．
【12】ASTM D4060 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser[S]．
【13】GB/T 1768-2006 色漆和清漆 耐磨性的测定 旋转橡胶砂轮法[S] ．
相关信息
