拉伸、冲击和硬度试验方法国际标准的修订和问题
Improvement on Tensile, Impact and Hardness Test Methods by ISO and Problems during Carrying out the Methods
摘 要
介绍了ISO/TC 164技术委员会对于拉伸和冲击试验方法标准的修订及执行中涉及的问题；另外还介绍了硬度试验方法标准主要的修订内容和原因以及仪器化压痕试验方法测试拉伸性能的研究工作。
夏比冲击试验
硬度试验
国际标准
tensile test
Charpy impact test
hardness test
international standard
Abstract
The improvement on tensile method, Charpy impact test method as well as hardness test methods standards which are under the jurisdiction of ISO/TC 164 is introduced. The problems during carrying out the tensile method and impact method standards are also discussed.
中图分类号 TG115.5
所属栏目 标准化
基金项目
收稿日期 2009/9/1
修改稿日期
网络出版日期
作者单位点击查看
备注李和平(1955-),男,教授级高级工程师。
引用该论文: LI He-ping. Improvement on Tensile, Impact and Hardness Test Methods by ISO and Problems during Carrying out the Methods[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2010, 46(6): 369～373
李和平. 拉伸、冲击和硬度试验方法国际标准的修订和问题[J]. 理化检验－物理分册, 2010, 46(6): 369～373
被引情况:
【1】张万松,王建国, "浅析金属材料室温拉伸试验方法变更后的证实",理化检验－物理分册 49, 310-313(2013)
共有人对该论文发表了看法，其中：
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】AEGERTER J, BLOCHING H, SONNE H M. Influence of the testing speed on the yield/proof strength-Tensile testing in compliance with EN 10002-1[J]. Materialprüfung,2001, 10：393-403．
【2】ISO 148-1:2006 Metallic Materials-Charpy Pendulum Impact Test-Part 1: Test Method[S]．
【3】NEGUMU T. Effects of the Striking Edge Radius in the Charpy Impact Test[R]//ASTM 1994 Annual Conference. USA:[s.n.],1994．
【4】SIEWWERT T A, VIGLIOTTI D P. The Effects of Charpy V-notch Striker Radii on the Absorbed Energy[R]//ASTM 1994 Annual Conference. USA:[s.n.],1994．
【5】GERNARD G. Presentation of the French Supply of Charpy V Reference Test Pieces[R]//ASTM 1944 Annual Conference. USA:[s.n.],1994．
【6】张庄,洪刚,任立志,等. 美国标准冲击标样试验数据分析[J]. 冶金分析,2006,26(增刊): 162-164．
【7】ISO/DTR 29381 Metallic materials-Measurement of Mechanical Properties by Instrumented Indentation Test -Indentation Tensile Properties[S]．
【8】JEON E C, KIM J Y, BAIK M K, et al. Optimum definition of true strain beneath a spherical indenter for deriving indentation flow curve[J]. Materials Science and Engineering A,2006,419(1/2):196-201．
【9】JAND J I, SON D, LEE Y H, et al. Assessing welding residual stress of A335 P12 steel welds before and after stress-relaxation annealing through instrumented indentation technique[J]. Scripta Materialia,2003,48(6): 743-748．
【2】ISO 148-1:2006 Metallic Materials-Charpy Pendulum Impact Test-Part 1: Test Method[S]．
【3】NEGUMU T. Effects of the Striking Edge Radius in the Charpy Impact Test[R]//ASTM 1994 Annual Conference. USA:[s.n.],1994．
【4】SIEWWERT T A, VIGLIOTTI D P. The Effects of Charpy V-notch Striker Radii on the Absorbed Energy[R]//ASTM 1994 Annual Conference. USA:[s.n.],1994．
【5】GERNARD G. Presentation of the French Supply of Charpy V Reference Test Pieces[R]//ASTM 1944 Annual Conference. USA:[s.n.],1994．
【6】张庄,洪刚,任立志,等. 美国标准冲击标样试验数据分析[J]. 冶金分析,2006,26(增刊): 162-164．
【7】ISO/DTR 29381 Metallic materials-Measurement of Mechanical Properties by Instrumented Indentation Test -Indentation Tensile Properties[S]．
【8】JEON E C, KIM J Y, BAIK M K, et al. Optimum definition of true strain beneath a spherical indenter for deriving indentation flow curve[J]. Materials Science and Engineering A,2006,419(1/2):196-201．
【9】JAND J I, SON D, LEE Y H, et al. Assessing welding residual stress of A335 P12 steel welds before and after stress-relaxation annealing through instrumented indentation technique[J]. Scripta Materialia,2003,48(6): 743-748．
相关信息
