Application of Electrolytic Polishing for Prepareing Metallographic Specimens of 6063 Aluminum Alloy
摘 要
对6063铝合金的电解抛光方法进行了研究, 根据电解抛光的一般原理通过试验选定了电解抛光的温度、时间、电流和电压等参数, 制备出了晶界清晰﹑抛光面无划痕、符合显微组织观察和分析要求的金相试样, 获得了比机械抛光效果更好的6063铝合金金相制样方法。
Abstract
The electrolytic polishing method of 6063 aluminum alloy was studied, according to the general principles of electrolytic polishing, the electrolytic polishing temperature, time, current, voltage and other parameters were selected by experiments. The specimens with polishing surface boundaries clear, without scratches, consistent with the observation and analysis requirements of microstructure were prepared. The method was better than mechanical polishing metallographic sample preparation method of 6063 aluminum alloy.
中图分类号 TG175.3
所属栏目 试验技术与方法
基金项目
收稿日期 2010/4/13
修改稿日期
网络出版日期
作者单位点击查看
备注朱 峰(1983-),男, 工程师, 工学学士。
引用该论文: ZHU Feng,WU Chao-qun,LIU Ying-kun. Application of Electrolytic Polishing for Prepareing Metallographic Specimens of 6063 Aluminum Alloy[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2010, 46(11): 692~694
朱峰,伍超群,刘英坤. 电解抛光在6063铝合金金相试样制备中的应用[J]. 理化检验-物理分册, 2010, 46(11): 692~694
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】高强. 最新有色金属金相图谱大全[M]. 北京: 冶金工业出版社, 2005: 1253-1256.
【2】赵志远. 铝和铝合金牌号与金相图谱[M]. 北京: 中国知识出版社, 2005: 774-775.
【3】VANDER V,著. 金相原理与实践[M]. 屠世润,高越,编译. 北京:机械工业出版社, 1990: 2-3.
【2】赵志远. 铝和铝合金牌号与金相图谱[M]. 北京: 中国知识出版社, 2005: 774-775.
【3】VANDER V,著. 金相原理与实践[M]. 屠世润,高越,编译. 北京:机械工业出版社, 1990: 2-3.
相关信息