Fracture Reason Analysis of 55CrSi Steel Valve Spring
摘 要
采用化学成分分析、金相检验和硬度测试等方法对3.6 mm 55CrSi钢气门弹簧在台架试验中的断裂原因进行分析。结果表明:由于钢丝表面存在的脆性非金属夹杂物,导致气门弹簧在试验时出现早期疲劳断裂。
Abstract
The fracture reason of 3.6 mm 55CrSi steel valve spring in dais experiment was analyzed by means of chemical composition analysis,metallographic examination and hardness testing.The results showed that the brittleness nonmetallic inclusion on the steel wire surface led to early fatigue fracture.
中图分类号 TH135
所属栏目 质量控制与失效分析
基金项目
收稿日期 2008/5/24
修改稿日期
网络出版日期
作者单位点击查看
备注孟凡西(1979-),男,工程师,学士。
引用该论文: MENG Fan-xi,YAN Xing-yi. Fracture Reason Analysis of 55CrSi Steel Valve Spring[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2009, 45(7): 446~447
孟凡西,闫行义. 55CrSi钢气门弹簧断裂原因分析[J]. 理化检验-物理分册, 2009, 45(7): 446~447
被引情况:
【1】王慧,朱凌静,王平,张安琪,刘海波,凌婷, "发动机气门弹簧断裂失效分析",理化检验-物理分册 51, 139-142(2015)
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】张德堂.钢中非金属夹杂物图谱[M].北京:国防工业出版社,1980:49-85.
【2】安运铮.热处理工艺学[M].北京:机械工业出版社,1985.
【3】GB/T 10561-1989 钢中非金属夹杂显微评定方法[S].
【4】上海交通大学《金相分析》编写组.金相分析[M].北京:国防工业出版社,1982.
【2】安运铮.热处理工艺学[M].北京:机械工业出版社,1985.
【3】GB/T 10561-1989 钢中非金属夹杂显微评定方法[S].
【4】上海交通大学《金相分析》编写组.金相分析[M].北京:国防工业出版社,1982.
相关信息