FAILURE REASON ANALYSIS ON SPRING FRACTURE OF 4102 DIESEL ENGINE OIL PUMP
摘 要
采用宏观与微观断口检验、化学成分分析、硬度测定以及显微组织观察等方法对断裂的柴油机喷油泵的弹簧进行了分析。结果表明,弹簧的断裂为沿晶脆性断裂,引起的原因主要是意外局部加热产生的高温导致材料组织发生异常所致。
Abstract
The fracture of a failed spring of diesel engine oil pump was investigated by fracture observation,chemical composition analysis,hardness testing and metallographic examination. The results showed that the crack is mostly along the grain boundary. The reason lies in the abnormal microstructure of the failed spring caused by accidently high temperature heating.
中图分类号 TK429 TK413.8
所属栏目 质量控制与失效分析
基金项目
收稿日期 2007/4/16
修改稿日期
网络出版日期
作者单位点击查看
备注刘亚平(1957-),女,工程师。
引用该论文: LIU Ya-ping,YU Xiang-qian. FAILURE REASON ANALYSIS ON SPRING FRACTURE OF 4102 DIESEL ENGINE OIL PUMP[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2007, 43(9): 483~485
刘亚平,俞向前. 4102柴油机喷油泵弹簧断裂原因分析[J]. 理化检验-物理分册, 2007, 43(9): 483~485
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】上海交通大学《金属断口分析》编写组.金属断口分析[M].北京:国防工业出版社,1979.
【2】胡世炎.机械失效分析手册[M].成都:四川科学技术出版社,1999:333.
【2】胡世炎.机械失效分析手册[M].成都:四川科学技术出版社,1999:333.
相关信息