AUTOMATIC MEASUREMENT SYSTEM OF DEFORMATION FOR CREEP TESTS
摘 要
为实现蠕变试样变形量的自动测量,建立了自动变形测量系统,该系统主要包括三个子系统:位移测量、数据采集以及试验监控及数据处理。该三个子系统有效地结合在一起构成整个系统,实现了利用一台计算机同时显示、记录八台蠕变试验机16个位移传感器动态微量变形的自动测量。
Abstract
In order to realize automatic measurement of creep deformation of creep specimens,A set of automatic measurement system is established,which includesing three subsystems: displacement-measurement,data acquisition and supervisory control and data processing. The overall system integrated effectively by the three subsystems implements the automatic dynamic measurement of minor creep deformation through a computer and sixteen displacement sensors. The minor creep deformations of eight specimens are able to display and record at the same time by a computer.
中图分类号 TB302.3
所属栏目 试验设备及应用
基金项目
收稿日期 2006/11/3
修改稿日期
网络出版日期
作者单位点击查看
备注贾国庆(1960-),男,高级工程师,学士。
引用该论文: JIA Guo-qing,ZHU Yue-mei. AUTOMATIC MEASUREMENT SYSTEM OF DEFORMATION FOR CREEP TESTS[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2007, 43(12): 623~625
贾国庆,朱月梅. 蠕变试验变形量的自动测量[J]. 理化检验-物理分册, 2007, 43(12): 623~625
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
相关信息
标题 | 相关频次 | |
T92钢在649℃不同应力蠕变过程中Laves相的析出行为及对强度的影响 | 2 | |
利用蠕变试验测试钛合金高温弹性模量 | 2 | |
两种形状试样的室温旋转弯曲疲劳性能的对比分析 | 2 | |
我国P91/T91钢生产及其性能的现状与进展 | 2 | |
电站锅炉承压元件的寿命评估方法 | 1 |