KEEPING AWAY FROM ERODED ON SUS301 STAINLESS STEEL DURING PRODUCTION
摘 要
SUS301不锈钢在冷轧过程中表面经常出现点状缺陷及裂纹。调查发现,该缺陷由晶间腐蚀造成,提高冷轧中间退火温度可以一定程度上消除缺陷,而设计合理的热轧卷取温度是避免产生该缺陷的根本措施。
Abstract
During the cool rolling process of SUS301 stainless steel,the punctual flaws and cracks are offen observed. Intergranular corrosion cause the flaws. Increasing the temperature annealing during the cool rolling can avoid the flaws parcel on some extent. Buts electing the suitable whirling temperature is the primary method to prevent above defects.
中图分类号 TG142.71
所属栏目 试验与研究
基金项目
收稿日期 2006/9/13
修改稿日期
网络出版日期
作者单位点击查看
备注张 波(1980-),男,助理工程师,学士。
引用该论文: ZHANG Bo,HU Qing-song,JIN Long. KEEPING AWAY FROM ERODED ON SUS301 STAINLESS STEEL DURING PRODUCTION[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2008, 44(2): 61~63
张 波,胡青松,金 龙. SUS301不锈钢生产过程中点状缺陷和裂纹的防范[J]. 理化检验-物理分册, 2008, 44(2): 61~63
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】吴民达.机械工程材料测试手册[M].沈阳:辽宁科学技术出版社,2002.
【2】陆世英.不锈钢[M].北京:原子能出版社,1995.
【2】陆世英.不锈钢[M].北京:原子能出版社,1995.
相关信息