搜索热:失效分析 陶瓷
扫一扫 加微信
首页 > 期刊论文 > 论文摘要
接触角测量技术的最新进展
          
RECENT DEVELOPMENT OF CONTACT ANGLE MEASUREMENT TECHNIQUE

摘    要
接触角是材料表面润湿性能的重要参数之一。通过接触角的测量可以获得材料表面固-液、固-气界面相互作用的许多信息。介绍了几种常见的接触角的测量方法,并详细介绍了接触角测量技术所取得的最新研究成果。
标    签 接触角   润湿   测试   Contact angle   Wetting   Measurement  
 
Abstract
Contact angle is one of the most important parameters to characterize materials surface wetting property. A lot of useful information about the interface of solid-liquid or solid-vapor can be acquired,through the measurement of contact angle. The common contact angles measurements were described and the recent development of the contact angle measurement techniques were reviewed.

中图分类号 O552.4+21

 
  中国光学期刊网论文下载说明


所属栏目 综述

基金项目 湖北大学有机功能分子合成与应用省部共建教育部重点实验室开放课题基金(2006-KL-008)

收稿日期 2007/4/24

修改稿日期

网络出版日期

作者单位点击查看

备注丁晓峰(1982-),男,硕士研究生。

引用该论文: DING Xiao-feng,GUAN Rong,CHEN Pei-zhi. RECENT DEVELOPMENT OF CONTACT ANGLE MEASUREMENT TECHNIQUE[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2008, 44(2): 84~89
丁晓峰,管 蓉,陈沛智. 接触角测量技术的最新进展[J]. 理化检验-物理分册, 2008, 44(2): 84~89


论文评价
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
分享论文
分享到新浪微博 分享到腾讯微博 分享到人人网 分享到 Google Reader 分享到百度搜藏分享到Twitter

参考文献
【1】Santos,Mohamed,Bannwart,et al. Contact angle measurements and wetting behavior of inner surfaces of pipelines exposed to heavy crude oil and water[J]. J Petrol Eng,2006,51(1/2):9.
 
【2】Wouters,Ruiter. Contact-angle development of polymer melts[J]. Prog Org Coat,2003,48(2-4):207.
 
【3】Blake. The physics of moving wetting lines[J]. J Colloid Interf Sci,2006,299(1):1-13.
 
【4】郑群锁.低表面能防污涂料的进展[J].材料开发与应用,2001,16(1):33.
 
【5】沈 洁,董 昊,张永熙,等.溶胶-凝胶法制备二氧化钛薄膜的亲水性研究[J].真空科学与技术,2000,20(6):385.
 
【6】Tavana,Simon,Grundke,et al. Interpretation of contact angle measurements on two different fluoropolymers for the determination of solid surface tension[J]. J Colloid Interf Sci,2005,291(2):497-506.
 
【7】Smedley,Coles. A refractive tilting-plate technique for measurement of dynamic contact angles[J]. J Colloid Interf Sci,2005,286(1):310-311.
 
【8】Bateni,Susnar,Amirfazli,et al. A high-accuracy polynomial fitting approach to determine contact angles[J]. Colloid Surface A,2003,219(1/3):215-219.
 
【9】Stalder,Kulik,Sage,et al. A snake-based approach to accurate determination of both contact points and contact angles[J]. Colloid Surface A,2006,286(1-3):92-103.
 
【10】Dingle,Harris. A robust algorithm for the simultaneous parameter estimation of interfacial tension and contact angle from sessile drop profiles[J]. J Colloid Interf Sci,2005,286(2):670-680.
 
【11】Della,Maniglio,Morra,et al. The determination of a stable-equilibrium contact angle on heterogeneous and rough surfaces[J]. Colloid Surface A,2002,206(1-3):47-67.
 
【12】Yang,Lin. A method for correcting the contact angle from the method[J]. Colloid Surface A,2003,220(1-3):199-210.
 
【13】Bardos. Contact angle dependence of solid probe–liquid drop forces in AFM measurements[J]. Surf Sci,2002,517(1-3):157-176.
 
【14】Bashforth,Adams. An Attempt to Test the Theory of Capillary Action[M]. Cambridge: Cambridge University Press,1995:1892-1896.
 
【15】Cabezas,Bateni,Montaner,et al. A new method of image processing in the analysis of axisymmetric drop shapes[J]. Colloid Surface A,2005,255(1-3):193-200.
 
【16】Zuo Ding,Bateni,Hoorfar,et al. Improvement of interfacial tension measurement using a captive bubble in conjunction with axisymmetric dropshape analysis (ADSA)[J]. Colloid Surface A,2004,250(1/3):233-246.
 
【17】Tavana,Neumann. On the question of rate-dependence of contact angles[J]. Colloid Surface A,2006,282/283:256-262.
 
【18】Oliver,Huh,Mason. The apparent contact angles of liquids on finely-grooved solid surfaces-a SEM study[J]. J Adhes,1977,8(1):223-234.
 
【19】Kwok,Lin,Mui,et al. Low-rate dynamic and static contact angles and the determination of solid surface tensions[J]. Colloid Surface A,1996,116(1/2):63-77.
 
【20】Katoh,Tsao,Yamamoto,et al. A new method for measuring contact angle and liquid surface tension applying detachment of two-dimensional meniscus[J]. J Colloid Interf Sci,1998,202(1):54-62.
 
相关信息
   标题 相关频次
 玻璃纤维表面能及其与不同树脂体系的润湿特性
 4
 CuO辅助Ag72Cu28共晶钎料在大气环境中实现Al2O3陶瓷钎焊的界面反应
 2
 S136不锈钢基体溅射氮化铬薄膜的硬度和接触角
 2
 X射线衍射法测残余应力的“突变”现象与定峰技巧探讨
 2
 超声氧化处理对碳纤维表面性能的影响
 2
 防锈油对DP590钢腐蚀行为的影响
 2
 焊接组合件表面荧光渗透检测前的润湿清洗试验
 2
 混凝土表面硅烷改性后的防腐蚀性能
 2
 具有超疏水表面的铜及铜合金耐蚀行为研究进展
 2
 纳秒激光加工和热处理对纯铝表面润湿性的影响
 2
 热电材料电阻率测试的影响因素
 2
 人体血液与不同成分及表面粗糙度钛合金的润湿性
 2
 渗透检测中渗透液的润湿现象与接触角
 2
 塑性应变比r值的测定和应用
 2
 天然气集输管道积液对有机胺缓蚀性能的影响
 2
 一种标准胶片特性曲线测试的方法
 2
 一种测定液体表面张力系数的新方法
 2
 “太空制造”计划在太空中3D打印和装配航天器
 1
 1.3GHz超导腔研发获新进展
 1
 3D打印材料研制及表征技术研讨会
 1
 SGS-CSTC Standards Technical Services Co., Ltd. Xiamen Branch
 1
 别眨眼:“超级高铁”完成首度测试 接近声速
 1
 残余应力X射线测试结果准确性的影响因素
 1
 残余应力测试结果的定性分析与判断
 1
 残余应力的产生及其对构件性能的影响
 1
 测试干货|冷冻扫描电镜技术的应用
 1
 测试核燃料强度新方法出炉
 1
 大豆制品中胰蛋白酶抑制剂的抑制活性测定
 1
 德克萨斯大学研究人员研发测试复合材料的方法
 1
 第二届航空计量测试与检验检测高峰论坛在成都圆满落幕!
 1