FRACTURE ANALYSIS ON THE STAINLESS STEEL TUBE
摘 要
不锈钢钢管在加工成型过程中发生开裂。采用金相及电子探针等方法对不锈钢钢管的开裂原因进行了分析。结果表明,硫和锰元素含量超标,大量非金属硫化物夹杂物的存在造成不锈钢钢管的开裂。
Abstract
The stainless steel tube was broken in the moulding process was analyzed by metallography and EPMA methods. The results showed that the higher contents of sulphur and manganese and the existence of non-metallic inclusion were the main factors causing the crack of stainless steel tube.
中图分类号 TG142.71
所属栏目 质量控制与失效分析
基金项目
收稿日期 2007/5/31
修改稿日期
网络出版日期
作者单位点击查看
备注伍超群(1967-),女,高级工程师,博士。
引用该论文: WU Chao-qun,ZHU Feng. FRACTURE ANALYSIS ON THE STAINLESS STEEL TUBE[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2008, 44(7): 373~374
伍超群,朱 峰. 不锈钢钢管开裂原因分析[J]. 理化检验-物理分册, 2008, 44(7): 373~374
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】唐纳德 皮克纳,I M 泊恩斯坦.不锈钢手册[M]. 顾守仁,周有德,泽. 北京:机械工业出版社,1987.
【2】冶金工业部钢铁研究院.合金钢断口分析金相图谱[M]. 北京:科学出版社,1979.
【2】冶金工业部钢铁研究院.合金钢断口分析金相图谱[M]. 北京:科学出版社,1979.
相关信息