Penetrant Testing of Axial Compressor Parts
摘 要
轴流风机是冶炼行业高炉系统中的关键辅机, 为保证其安全运行, 对该机的某些部件必须作定期检测。结合轴流风机工作现场的实际状况, 提出采用着色渗透检测方法对其进行检测, 并对其检测步骤和要点作了详细介绍, 确保了检测结果的可靠性。
Abstract
Axial compressor is the key auxiliary machinery of blast furnace in smelting industry and its some parts must be tested regularly for safety running. According to practical condition, the axial compressor was tested by dye penetrant testing method, and the steps and key points of testing process were introduced in detail. The reliability of testing results was ensured.
中图分类号 TG115.28
所属栏目 实践经验
基金项目
收稿日期 2009/2/19
修改稿日期
网络出版日期
作者单位点击查看
备注吴 立(1978-), 男, 本科, 主任工程师, 无损检测(MT/PT)高级人员, 主要从事特种设备和钢结构无损检测工作。
引用该论文: WU Li. Penetrant Testing of Axial Compressor Parts[J]. Nondestructive Testing, 2010, 32(1): 72~73
吴 立. 轴流风机部件的渗透检测[J]. 无损检测, 2010, 32(1): 72~73
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】胡学知.渗透检测[M].北京: 中国劳动社会保障出版社, 2007.
【2】JB/T 4730.5—2005 承压设备无损检测 第5部分 渗透检测[S].
【2】JB/T 4730.5—2005 承压设备无损检测 第5部分 渗透检测[S].
相关信息