扫一扫 加微信
首页 > 期刊论文 > 论文摘要
亚毫米波成像技术对工业排线的无损检测
          
Nondestructive Testing of Industrial Flat Cable with the Technology of Terahertz Quasi-Near-Field Real-Time Imaging

摘    要
利用亚毫米波准近场实时成像系统对三种常用的微小结构的工业电子排线进行检测, 直接获得了样品在信号峰值处的强度图像。分别对样品中的金属、缺陷及包覆材料连接处抽取数据, 并对其进行频谱及相位处理, 在时域、频域及相位图中做了对比与分析。通过对原始图像进行图像处理后, 分别得到振幅和相位图像, 其中相位图像能更清晰地反映排线中隐藏的缺陷。结果证明, 亚毫米波准近场成像系统可以用于具有细微结构材料的无损检测。
标    签 亚毫米波   准近场成像   无损检测   Terahertz   Quasi-near-field imaging   Nondestructive testing  
 
Abstract
A terahertz (THz) quasi-near-field real-time imaging system was presented, with which three industrial flat cables with minute structures were nondestructively tested. In the obtained image at the peak of signal, data from metal, defect, and cladding material were extracted and Fourier transformed, and then comparisons and analyses had been performed in the time domain, frequency domain and phase domain. Furthermore, images for amplitude and phase were obtained by processing the original images, and it showed that the phase images reflect the defects more obviously than others. Testing results showed that THz quasi-near-field real-time imaging could be widely applied in quality monitoring and inspection of materials with minute structures.

中图分类号 TG115.28

 
  中国光学期刊网论文下载说明


所属栏目 试验研究

基金项目 国家973资助项目(2007CB310408); 北京市教委科技资助项目(KM200810028008)

收稿日期 2009/8/27

修改稿日期

网络出版日期

作者单位点击查看

备注孙文峰(1976-), 男, 讲师, 博士, 从事成像技术研究。

引用该论文: SUN Wen-Feng,WANG Xin-Ke,CUI Ye,ZHANG Yan. Nondestructive Testing of Industrial Flat Cable with the Technology of Terahertz Quasi-Near-Field Real-Time Imaging[J]. Nondestructive Testing, 2010, 32(2): 112~115
孙文峰,王新柯,崔烨,张岩. 亚毫米波成像技术对工业排线的无损检测[J]. 无损检测, 2010, 32(2): 112~115


论文评价
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
分享论文
分享到新浪微博 分享到腾讯微博 分享到人人网 分享到 Google Reader 分享到百度搜藏分享到Twitter

参考文献
【1】谢旭, 钟华, 袁韬, 等.使用太赫兹技术研究航天飞机失事的原因[J ].物理, 2003, 32(9): 583-584.
 
【2】Wang Xinke, Cui Ye, Sun Wenfeng, et al. Terahertz pulse reflective focal-plane[J ]. Opt Express, 2007, 15(22): 14369-14375.
 
【3】周燕, 牧凯军, 张艳东, 等.燃料箱泡沫板的连续太赫兹波无损检测[J].无损检测, 2007, 29(5): 266-271.
 
【4】Hunsche S, Koch M, Brener I, et al. THz near-field imaging[J]. Opt Commun, 1998(150): 22-26.
 
【5】Jiang Z P, Xu X G, Zhang X C. Improvement of terahertz imaging with a dynamic subtraction technique[J]. Appl Optics, 2000, 39(17): 2982-2987.
 
【6】Zhong Hua, Sanchez Albert Redo, Zhang X C. Identification and classification of chemicals using terahertz reflective spectroscopic focal-plane imaging system[J]. Opt Express, 2006, 14(20): 9130-9141.
 
【7】Zhang L L, Karpowicz Nick, Zhang C L, et al. Real-time nondestructive imaging with THz waves[J]. Opt Commun, 2008(281): 1473-1475.
 
相关信息
   标题 相关频次
 燃料箱泡沫板的连续太赫兹波无损检测
 3
 亚毫米波无损检测技术
 3
 20CrMnTi钢渗碳淬火硬化层深度的磁矫顽力检测
 2
 300M钢热损伤的巴克豪森检测
 2
 35号冷轧钢在不同阶段应力作用下的磁效应特征
 2
 ASNT SNT-TC-1A人员认证在我国的发展情况
 2
 CNDT&E“云”检测与评价技术
 2
 DR检测技术在空调零部件焊接领域的应用
 2
 Excel软件在无损检测资料整理中的应用
 2
 FRP片材加固界面补丁式剥离损伤的光纤检测技术
 2
 GIS盆式绝缘子模拟缺陷的X-DR成像检测
 2
 ISO 17635:2010标准主要规定内容及其国内应用现状
 2
 ISO 9712-2012与TSGZ 8001-2019标准的主要异同解析
 2
 L458M钢管道无损检测缺陷产生原因
 2
 NB/T47013-2015《承压设备无损检测》中工艺验证的实施方法
 2
 NDT集成新技术时代的到来
 2
 Ni-Mo黏结剂含量对放电等离子烧结TiC0.7N0.3基金属陶瓷力学性能的影响
 2
 TaW薄板分层缺陷检测及成因分析
 2
 TMR传感器及其在电磁检测中的应用
 2
 WiFi无线技术在巴克豪森无损检测系统中的应用
 2
 X射线数字成像技术在预应力索灌浆质量检测中的应用
 2
 奥氏体不锈钢中径管焊缝超声爬波探伤
 2
 奥氏体不锈钢中马氏体含量的相关无损检测方法
 2
 奥氏体锅炉管氧化皮堆积厚度脉冲涡流检测
 2
 波音飞机无损检测手册编制方法
 2
 玻璃钢缺陷的空耦激光超声检测
 2
 薄板结构中Lamb波的检测与仿真
 2
 残余应力的超声检测方法
 2
 测控技术与仪器(无损检测)专业培养计划分析与探索
 2
 层压结构复合材料的激光剪切散斑检测
 2