Effects of Drawing Speed on the Acoustic Emission Signals in Drawing
摘 要
冲压速度对冲压成形工艺影响很大, 为此利用声发射技术来检测不同速度下的冲压过程。以不同速度下的冲压过程产生的声发射信号幅度为研究对象, 研究两者之间的关系。结果表明, 冲压速度对冲压成形过程中产生的声发射信号幅度影响非常大。即随着速度的增大, 声发射信号幅度随之增大。
Abstract
The speed of drawing has an important influence on drawing, so it can detect the process of drawing in different speeds by using acoustic emission testing technique. The purpose of this experiment is different amplitude of acoustic emission signals are studied in various velocities in the process of acoustic emission, through signals we can research that the relation of different kinds of friction-motion speed and amplitude of acoustic emission signal. The results showed that the speed of drawing has an important influence on amplitude of acoustic emission signal in the process of drawing. So it is concluded that with the aggrandizement of speed, amplitude of acoustic emission signals increases.
中图分类号 TG115.28
所属栏目 科研成果与学术交流
基金项目 国家自然科学基金项目(50565002)
收稿日期 2009/4/30
修改稿日期
网络出版日期
作者单位点击查看
备注孟 维(1985-), 女, 硕士, 主要研究方向为利用声发射技术检测金属塑性过程。
引用该论文: MENG Wei,ZHANG Shou-Zhuo,GAO Hong,WEI Sheng-Chun. Effects of Drawing Speed on the Acoustic Emission Signals in Drawing[J]. Nondestructive Testing, 2010, 32(3): 163~165
孟 维,张守茁,高 宏,魏盛春. 冲压过程中冲压速度对声发射信号幅度的影响[J]. 无损检测, 2010, 32(3): 163~165
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】胡昌洋.声发射技术及其在检测中的应用[J].计量与测试技术, 2008, 35(6): 1-2.
【2】朱正才.冲压件起皱和破裂起因探讨[J].机械研究与应用, 2008, 21(3).40-41.
【3】张守茁.摩擦过程中相对运动速度对声发射能量信号的影响[J].润滑与密封, 2008, 33(5): 11-14.
【2】朱正才.冲压件起皱和破裂起因探讨[J].机械研究与应用, 2008, 21(3).40-41.
【3】张守茁.摩擦过程中相对运动速度对声发射能量信号的影响[J].润滑与密封, 2008, 33(5): 11-14.
相关信息