Use of Parameter Analysis of Acoustic Emission Signals During Tensile Testing of Magnalium
摘 要
介绍了声发射信号特征参数及简单参数分析方法。用声发射技术监测了镁铝合金的拉伸过程, 对比分析了拉伸特性曲线和声发射分布图随时间的变化规律, 发现声发射事件计数和幅值能很好地反映拉伸的不同阶段。对信号参数进行关联分析, 事件计数和能量关联在时间上的分布能很好地区分拉伸过程中的声源, 也能很好地区分拉伸的不同阶段。
Abstract
The characteristic parameter and simple parameter analysis methods of acoustic emission signals were introduced. The tensile testing of magnesium alloy was monitored with acoustic emission. Compared the acoustic emission signals with tensile diagram of magnesium alloy tensile test, it was found that different tensile stages could be well reflected by acoustic emission event counts and amplitudes. The different stages of tensile testing could also be differentiated by the correlation analysis of acoustic emission signal parameters.
中图分类号 TG115.28
所属栏目 科研成果与学术交流
基金项目
收稿日期 2009/6/4
修改稿日期
网络出版日期
作者单位点击查看
备注梁志刚(1976-), 男, 工程师, 博士研究生, 从事爆炸与冲击动力学方面的研究工作。
引用该论文: LIANG Zhi-Gang,WU Yan-Hong,JIANG Xu-Xin,HUO Hong-Fa,QIN Xue-Jun,SHEN Yu-Di,CHEN Hua-Ling. Use of Parameter Analysis of Acoustic Emission Signals During Tensile Testing of Magnalium[J]. Nondestructive Testing, 2010, 32(4): 242~245
梁志刚,吴艳红,蒋旭鑫,霍宏发,秦学军,沈玉娣,陈花玲. 声发射信号特征参数分析方法在镁铝合金拉伸试验分析中的应用[J]. 无损检测, 2010, 32(4): 242~245
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】沈功田, 戴光, 刘时风.中国声发射检测技术进展——学会成立25周年纪念[J].无损检测, 2003, 25(6): 302-307.
【2】杨瑞峰, 马铁华.声发射技术研究及应用进展[J].中北大学学报(自燃科学版), 2006, 27(5): 456-461.
【3】戴光, 徐彦廷, 李伟, 等.声发射技术的应用与研究进展[J].大庆石油学院学报, 2001, 25(3): 95-98.
【4】Prine D W. Inspection of nuclear reactor welding by acoustic emission[J]. Welding Design and Fabrication, 1977, 50(1): 74.
【5】Dunegan H L. Detection of fatigue crack growth by acoustic emission techniques[J]. Materials Evaluation, 1970, 28(10): 221-223.
【6】Rice A. Characteristics of acoustic emission sensors employed for tool condition monitoring[C]//. Proceedings of the Seventh Workshop on Supervising and Diagnostics of Machining Systems. CIRP, Darpacz: Technical University of Wroclaw, 1996: 241-252.
【7】Ravindra H V. Some aspects of acoustic emission signal processing[J]. Journal of Materials Processing Technology, 2001(109): 242-247.
【8】Nanjo E. Fracture mechanism and acoustic emission of short carbon-fiber reinforced material[J]. J Mater Sci, 1993(61): 42-55.
【9】Vaidya H. Pull-out and fragmentation in model fiber composites[J]. J Mater Sci, 1991(26): 2467-2476.
【10】金周庚, 朱成, 潘向华, 等.碳-氧复合材料破坏类型声发射特性[C]// 第四届全国声发射会议论文集.黄岛: [s.n.], 1989: 211-213.
【11】曾小勤, 王渠东.镁合金应用新进展[J].铸造, 1998(11): 39-43.
【12】戴光, 徐彦廷, 李伟, 等.声发射源信号强度的“逆源”问题研究[J].大庆石油学院学报, 1998(22), 59-62.
【2】杨瑞峰, 马铁华.声发射技术研究及应用进展[J].中北大学学报(自燃科学版), 2006, 27(5): 456-461.
【3】戴光, 徐彦廷, 李伟, 等.声发射技术的应用与研究进展[J].大庆石油学院学报, 2001, 25(3): 95-98.
【4】Prine D W. Inspection of nuclear reactor welding by acoustic emission[J]. Welding Design and Fabrication, 1977, 50(1): 74.
【5】Dunegan H L. Detection of fatigue crack growth by acoustic emission techniques[J]. Materials Evaluation, 1970, 28(10): 221-223.
【6】Rice A. Characteristics of acoustic emission sensors employed for tool condition monitoring[C]//. Proceedings of the Seventh Workshop on Supervising and Diagnostics of Machining Systems. CIRP, Darpacz: Technical University of Wroclaw, 1996: 241-252.
【7】Ravindra H V. Some aspects of acoustic emission signal processing[J]. Journal of Materials Processing Technology, 2001(109): 242-247.
【8】Nanjo E. Fracture mechanism and acoustic emission of short carbon-fiber reinforced material[J]. J Mater Sci, 1993(61): 42-55.
【9】Vaidya H. Pull-out and fragmentation in model fiber composites[J]. J Mater Sci, 1991(26): 2467-2476.
【10】金周庚, 朱成, 潘向华, 等.碳-氧复合材料破坏类型声发射特性[C]// 第四届全国声发射会议论文集.黄岛: [s.n.], 1989: 211-213.
【11】曾小勤, 王渠东.镁合金应用新进展[J].铸造, 1998(11): 39-43.
【12】戴光, 徐彦廷, 李伟, 等.声发射源信号强度的“逆源”问题研究[J].大庆石油学院学报, 1998(22), 59-62.
相关信息