Visual Spectroscopic Analysis of Aluminum Alloy for the Componental Elements
摘 要
研究了铝合金基体和合金中铝元素的看谱分析方法.对铝合金可见光谱线的激发方法及条件进行了试验探索.讨论了分析线和比较线的选取并摄制了相应的彩色图谱.结果可用于铝合金基体和合金中铝元素的定性和半定量看谱分析工作,能满足铝合金材料牌号鉴别的需求.
Abstract
A method of visual spectroscopic analysis of aluminum alloys for their componental elements was studied and reported. Method and parameters of excitation of aluminum alloys and their analytical spectral lines emitted in the visible spectral region were experimentally investigated. Selection of analytical spectral lines of the analyte and the internal standard was discussed and typical color spectrograms of alloying elements of aluminum alloy were taken. The proposed method was feasible to be used in qualitative and semi-quantitative analysis of aluminum alloys for the alloying elements,as well as for the identification of the designation and code of the alloys.
中图分类号 O657
所属栏目 工作简报
基金项目 国防科技军用材料标准化项目(B062003Cxxx)
收稿日期 2006/10/27
修改稿日期
网络出版日期
作者单位点击查看
备注刘平(1961-),男,山东泰安人,研究员,从事航空材料及性能研究工作.
引用该论文: LIU Ping,PANG Xiao-hui,YANG Jun-hong,CHEN Shuang-pin,LIU Xiao-yan,LI Guo-hua. Visual Spectroscopic Analysis of Aluminum Alloy for the Componental Elements[J]. Physical Testing and Chemical Analysis part B:Chemical Analysis, 2008, 44(3): 271~274
刘平,庞晓辉,杨军红,陈双聘,刘晓燕,李国华. 看谱法测定铝合金的成分元素[J]. 理化检验-化学分册, 2008, 44(3): 271~274
被引情况:
【1】刘平,杨军红,刘浩新, "改进的可见光谱法测定铝合金中钛",理化检验-化学分册 45, 1289-1291(2009)
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】冶金工业部情报产品标准研究所编译.光谱线波长表[M].北京:中国工业出版社,1971:616-617.
【2】李国华,徐秋心.金属材料看谱分析手册[M].成都:四川大学出版社,2000:117-118.
【3】刘平,杨军红,庞晓辉,等.铁基合金基体及成分元素看谱分析方法研究[J].分析试验室,2005,24(增刊):219-222.
【2】李国华,徐秋心.金属材料看谱分析手册[M].成都:四川大学出版社,2000:117-118.
【3】刘平,杨军红,庞晓辉,等.铁基合金基体及成分元素看谱分析方法研究[J].分析试验室,2005,24(增刊):219-222.
相关信息