钨块-铜管热等静压焊接界面电磁超声检测的数值模拟
Numerical Simulation of EMAT NDT for HIP Welding Joint in W-Cu Mono-Block
摘 要
托卡马克装置的偏滤器靶板多为钨块-铜管穿管部件,钨块-铜管间采用热等静压(HIP)焊接且有过渡层,具有多层管状结构。针对该多层管焊接界面的无损检测,提出了管外施加偏置磁场的电磁超声检测方法,开发了多层管电磁超声检测信号数值模拟程序,通过计算和比较缺陷区域大小和探头-缺陷相对位置对检出信号的影响,分析了横波和纵波探头的检测灵敏度和空间分辨率,说明了电磁超声无损检测方法对多层管界面脱粘缺陷检测的有效性。
数值模拟
多层管
界面缺陷
EMAT
Numerical Simulation
Multilayered Pipes
Interface defect
Abstract
The vertical target of diverter of a Tokamak system consists of a lot of units of W-Cu Mono-block which has a multi-layer tube structure and is bonded together with the HIP welding technique. To validate the NDT method for quality of welding joint of the Mono-blocks,a numerical code was developed for the signal simulation of EMAT of a multi-layer tube,and was used to investigate the detectability and space resolution of EMAT probes with two different structures. Numerical results verified the validity of the proposed EMAT method and probe structure for the inspection of delamination in multilayer tube.
中图分类号 TG115.28 DOI 10.11973/wsjc201511005
所属栏目 2015远东无损检测新技术论坛论文精选
基金项目
收稿日期 2015/5/28
修改稿日期
网络出版日期
作者单位点击查看
备注肖盼(1992-),女,硕士研究生,研究方向为电磁无损检测理论和试验研究。
引用该论文: XIAO Pan,YANG Gui-cai,PEI Cui-xiang,XIE She-juan,CHEN Zhen-mao. Numerical Simulation of EMAT NDT for HIP Welding Joint in W-Cu Mono-Block[J]. Nondestructive Testing, 2015, 37(11): 18～21
肖盼,杨桂才,裴翠祥,解社娟,陈振茂. 钨块-铜管热等静压焊接界面电磁超声检测的数值模拟[J]. 无损检测, 2015, 37(11): 18～21
共有人对该论文发表了看法，其中：
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】肖美华,陈振茂,李勇,等.多层管HIP焊接界面脱粘涡流检测数值模拟研究［J］.失效分析与预防,2013,8（2）：65-68.
【2】LUDWIG R,PALANISAMY R.Numerical simulations of an electromagnetic acoustic transducer-receiver system for NDT applications［J］. IEEE Transactions on Magnetics,1993,29(3): 2081-2088.
【3】KALTENBACHER M,ETTINGER K,LERCH R. Finite element analysis of coupled electromagnetic acoustic systems［J］. IEEE Transactions on Magnetics,1999,35(3): 1610-1613.
【4】周海强,李勇,陈振茂.铁磁材料电磁超声无损检测数值模拟［J］.无损检测,2012,34(11):21-24.
【5】CHEN Z M,KUROKAWA,MIYA K,et al. Rapid prediction of eddy current testing signals A-fai method and database［J］.NDT&E International ,1999,32:29-36.
【6】PEI C,CHEN Z M,WU W.Development of simulation method for EMAT signals and applications to TBC inspection［J］. Int. J. Appl. Electromagn. Mech.,2010,33(3/4):1077-1085.
【2】LUDWIG R,PALANISAMY R.Numerical simulations of an electromagnetic acoustic transducer-receiver system for NDT applications［J］. IEEE Transactions on Magnetics,1993,29(3): 2081-2088.
【3】KALTENBACHER M,ETTINGER K,LERCH R. Finite element analysis of coupled electromagnetic acoustic systems［J］. IEEE Transactions on Magnetics,1999,35(3): 1610-1613.
【4】周海强,李勇,陈振茂.铁磁材料电磁超声无损检测数值模拟［J］.无损检测,2012,34(11):21-24.
【5】CHEN Z M,KUROKAWA,MIYA K,et al. Rapid prediction of eddy current testing signals A-fai method and database［J］.NDT&E International ,1999,32:29-36.
【6】PEI C,CHEN Z M,WU W.Development of simulation method for EMAT signals and applications to TBC inspection［J］. Int. J. Appl. Electromagn. Mech.,2010,33(3/4):1077-1085.
相关信息
