The Finite Element Simulation of Magnetic Flux Leakage Detection (MFL) Used for Corrosion Defects
摘 要
基于漏磁检测原理,针对石油石化行业常见的腐蚀缺陷,运用有限元分析方法进行仿真研究。选取厚度8 mm的钢板为试验对象,应用ANSYS 有限元分析软件进行建模分析。研究了不同参数对漏磁场的影响,参数包括缺陷深度、宽度以及磁化气隙高度;同时建立了两个相邻缺陷的模型,分析不同缺陷之间存在不同间距时对漏磁场的影响,得到相应的结果。
Abstract
This article mainly aims at the defects of the common corrosion in petroleum and petrochemical industry,based on the principle of magnetic flux leakage detection,using the method of finite element analysis for the simulation research. Steel plate with the thickness of 8 mm was selected as the research object,and ANSYS finite element analysis software was used for modeling and analysis. Effects of different factors on the magnetic leakage field were mainly studied,including the flaw depth,width and height of the air gap magnetic. At the same time,a model of two adjacent defects was established,and the influence of different spacing between existing defects on magnetic leakage field was analyzed. Corresponding results were thus obtained.
中图分类号 TG115.28 DOI 10.11973/wsjc201511012
所属栏目 试验研究
基金项目 国家自然科学基金资助项目(11272084)
收稿日期 2015/3/23
修改稿日期
网络出版日期
作者单位点击查看
备注杨志军(1976-),男,副教授,博士,主要从事现代无损检测技术研究和无损检测仪器开发工作。
引用该论文: YANG Zhi-jun,CHEN De-shu,CHEN Liang,WANG Gang. The Finite Element Simulation of Magnetic Flux Leakage Detection (MFL) Used for Corrosion Defects[J]. Nondestructive Testing, 2015, 37(11): 51~55
杨志军,陈德姝,陈亮,王刚. 腐蚀缺陷漏磁场检测有限元模拟[J]. 无损检测, 2015, 37(11): 51~55
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】戴光,白明超,杨志军,等. 储罐角焊缝裂纹漏磁检测有限元分析[J]. 无损检测,2014,36(12):89-93.
【2】马传瑾,关卫和,郭鹏举,等. 漏磁检测技术在大型原油储罐底板上的应用[J]. 无损检测,2012,34(7):17-20.
【3】赵彦修,邢述,王十,等. 漏磁技术在常压储罐检测中的应用[J]. 无损检测,2015,37(2):52-55.
【4】杨志军,戴光,陈志华. 储罐底板漏磁检测腐蚀缺陷轮廓反演方法[J]. 无损检测,2013,35(10):45-47.
【5】戴光,孙立强,杨志军,等. 圆筒形容器漏磁内检测ANSYS仿真分析与试验[J]. 无损检测,2013,35(3):25-29.
【2】马传瑾,关卫和,郭鹏举,等. 漏磁检测技术在大型原油储罐底板上的应用[J]. 无损检测,2012,34(7):17-20.
【3】赵彦修,邢述,王十,等. 漏磁技术在常压储罐检测中的应用[J]. 无损检测,2015,37(2):52-55.
【4】杨志军,戴光,陈志华. 储罐底板漏磁检测腐蚀缺陷轮廓反演方法[J]. 无损检测,2013,35(10):45-47.
【5】戴光,孙立强,杨志军,等. 圆筒形容器漏磁内检测ANSYS仿真分析与试验[J]. 无损检测,2013,35(3):25-29.
相关信息