Wood Defect Inspection by Drilling Resistance Method
摘 要
介绍了利用钻入阻抗法对木材缺陷检测的基本原理, 给出了不同类型缺陷下的典型阻力曲线形式, 提出了木构件检测的一般规定和缺陷评定方法, 确定了用于木材阻力仪精度校核的标准木, 并规定了采用标准木进行仪器校准的基本方法, 为规范钻入阻抗法进行木材缺陷检测提供了技术支撑。
Abstract
The principle of inspection technique for wood defect by drilling resistance method was introduced and typical resistance graphs for different wood defects were presented. Basic instructions and defect evaluation method of the technique were proposed for timber structures. Reference wood and accuracy calibration method for the instrument were prescribed. Research results in the paper can provide necessary reference for standardizing the inspection technique for wood defect.
中图分类号 TG115.28 DOI 10.11973/wsjc201601002
所属栏目 试验研究
基金项目 上海市优秀技术带头人计划资助项目(15XD1522600);住房和城乡建设部研究开发资助项目(2014-K2-013)
收稿日期 2015/6/27
修改稿日期
网络出版日期
作者单位点击查看
备注张富文(1982-),男,博士,高级工程师,主要从事木结构和结构抗震的研究和工程应用工作。
引用该论文: ZHANG Fu-wen,XU Qing-feng,ZHANG Zhi-yu,LIU Qiong. Wood Defect Inspection by Drilling Resistance Method[J]. Nondestructive Testing, 2016, 38(1): 6~9
张富文,许清风,张治宇,刘琼. 钻入阻抗法检测木材缺陷[J]. 无损检测, 2016, 38(1): 6~9
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】FRANK R. Catalog of relative density profiles of trees, poles, and timber derived from resistograph micro-drillings[R]. [S.l]:[s.n], 1993: 61-67.
【2】FRANK R. Resistographic inspection of construction timber, poles and trees[J]. Pacific Timber Engineering Conference, 1994(2): 468-478.
【3】PAUL M W, WEI W, RUPERT W. Application of a drill resistance technique for density profile measurement in wood composite panels[J]. Composites & Manufactured Products, 1995, 45(6): 90-93.
【4】LAURENCE R C, STEPHEN L Q. Detection of wood decay in blue gum and elm: an evaluation of the resistographa and the portable drill[J]. Journal of Arboriculture, 1999, 25(6): 331-337.
【5】段新芳, 李玉栋, 王平. 无损检测技术在木材保护中的应用[J]. 木材工业, 2002, 16(5): 14-16.
【6】张晓芳, 李华, 刘秀英, 等.木材阻力仪检测技术的应用[J]. 木材工业, 2007, 21(2): 41-43.
【7】安源, 殷亚方, 姜笑梅, 等.应力波和阻抗仪技术勘查木结构立柱腐朽分布[J]. 建筑材料学报, 2008, 11(4): 457-463.
【8】黄荣凤, 王晓欢, 李华, 等.古建筑木材内部腐朽状况阻力仪检测结构的定量分析[J]. 北京林业大学学报, 2007, 29(6): 167-171.
【9】廖春晖, 张厚江, 黎冬青, 等.古建筑圆柱形木构件内部缺陷筛查方法研究[J]. 北京林业大学学报, 2013, 35(1): 123-126.
【10】李华, 陈勇平, 黎冬青, 等. 古建筑木构件阻力仪检测中影响阻力值的因素探讨[J]. 木材加工机械, 2011, 22(1): 19-21,26.
【2】FRANK R. Resistographic inspection of construction timber, poles and trees[J]. Pacific Timber Engineering Conference, 1994(2): 468-478.
【3】PAUL M W, WEI W, RUPERT W. Application of a drill resistance technique for density profile measurement in wood composite panels[J]. Composites & Manufactured Products, 1995, 45(6): 90-93.
【4】LAURENCE R C, STEPHEN L Q. Detection of wood decay in blue gum and elm: an evaluation of the resistographa and the portable drill[J]. Journal of Arboriculture, 1999, 25(6): 331-337.
【5】段新芳, 李玉栋, 王平. 无损检测技术在木材保护中的应用[J]. 木材工业, 2002, 16(5): 14-16.
【6】张晓芳, 李华, 刘秀英, 等.木材阻力仪检测技术的应用[J]. 木材工业, 2007, 21(2): 41-43.
【7】安源, 殷亚方, 姜笑梅, 等.应力波和阻抗仪技术勘查木结构立柱腐朽分布[J]. 建筑材料学报, 2008, 11(4): 457-463.
【8】黄荣凤, 王晓欢, 李华, 等.古建筑木材内部腐朽状况阻力仪检测结构的定量分析[J]. 北京林业大学学报, 2007, 29(6): 167-171.
【9】廖春晖, 张厚江, 黎冬青, 等.古建筑圆柱形木构件内部缺陷筛查方法研究[J]. 北京林业大学学报, 2013, 35(1): 123-126.
【10】李华, 陈勇平, 黎冬青, 等. 古建筑木构件阻力仪检测中影响阻力值的因素探讨[J]. 木材加工机械, 2011, 22(1): 19-21,26.
相关信息