Positional Error in Ultrasonic Testing of Stainless Clad Plate Butt Welds
摘 要
通过对超声横波在不锈钢复合钢板中传播时产生的定位误差进行分析,得出复合板对接焊缝超声波检测时的定位误差补偿规律, 给出了定位误差的补偿方法, 并对复合板对接焊缝表面缺陷和内部缺陷进行定位误差补偿比对试验, 从而总结出一种操作简便、缺陷定位较准确的复合板对接焊缝超声波检测方法。
Abstract
Through the analysis of positional error during ultrasonic shear wave propagation in the clad steel plate′s butt welds, conclusions were drawn for the ultrasonic testing′s positional error compensation rules and the positional error compensation method was also given. Comparison tests of positional error compensation have been done for the surface defects and internal defects in the clad steel plate′s butt welds. An ultrasonic detection method of simple operation and accurate defect locating was summarized for the clad steel plate's butt welds.
中图分类号 TG115.28 DOI 10.11973/wsjc201601013
所属栏目 试验研究
基金项目
收稿日期 2015/4/7
修改稿日期
网络出版日期
作者单位点击查看
备注郑文江(1956-), 男, 高级工程师, 主要从事承压设备超声检测工作。
引用该论文: ZHENG Wen-jiang,CAO Fu-xiang,GUO Shao-hong,DENG Bo. Positional Error in Ultrasonic Testing of Stainless Clad Plate Butt Welds[J]. Nondestructive Testing, 2016, 38(1): 49~51
郑文江,曹福想,郭少宏,邓波. 不锈钢复合板对接焊缝超声波检测中的定位误差[J]. 无损检测, 2016, 38(1): 49~51
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】周松,曾为民, 胡雯, 等.16MnR+316L复合钢板焊接工艺及性能研究[J].化工装备技术,2009,30(6):49-50,60.
【2】富阳.复合板压力容器裂纹的无损检测[J].无损检测,2010,33(3):227-229.
【3】林绳准.复合钢板对接焊缝中横向裂纹的超声波检测[J].市油工程建设,1991(5):38-39.
【4】何中吉.凝汽器不锈钢复合材料焊缝的超声波探伤[C].河南: 河南省机械工程学会, 2003:179-182.
【5】王能利, 张希艳, 潘希德, 等.超薄层0Cr18Ni9/20g复合钢板的焊接工艺及接头组织[J].机械工程材料,2007,33(11):55-57,64.
【6】宁克冰,刘继儒.用超声波测厚仪对不锈钢复合板厚度的精确测量[J].无损检测,2013,35(6):74-76.
【2】富阳.复合板压力容器裂纹的无损检测[J].无损检测,2010,33(3):227-229.
【3】林绳准.复合钢板对接焊缝中横向裂纹的超声波检测[J].市油工程建设,1991(5):38-39.
【4】何中吉.凝汽器不锈钢复合材料焊缝的超声波探伤[C].河南: 河南省机械工程学会, 2003:179-182.
【5】王能利, 张希艳, 潘希德, 等.超薄层0Cr18Ni9/20g复合钢板的焊接工艺及接头组织[J].机械工程材料,2007,33(11):55-57,64.
【6】宁克冰,刘继儒.用超声波测厚仪对不锈钢复合板厚度的精确测量[J].无损检测,2013,35(6):74-76.
相关信息