Quality Control of Physical and Chemical Tests on Petrochemical Construction Site
摘 要
随着国家的科技进步和经济发展, 大型容器、加氢反应器等厚壁高温高压产品逐渐增多, 质量要求也更加严格, 一些大型容器需要在施工现场进行理化检验。由于施工现场设施简陋, 环境因素变化无常, 理化检验的质量控制就显得尤为重要。只有正确地掌控现场理化检验的各个因素, 才能得到精确的现场理化检验数据, 出具准确的检测报告。
Abstract
With the development of national technology and economy, more and more thick wall products were produced, which could bear high temperature and high pressure such as heavy vessels and hydrogenation reactors. Stricter requirements were put forward to keep good quality of the products. Physical and chemical tests of large vessels should be carried out on construction site. Due to the simple facilities and changeable environment of the construction site, the quality control of physical and chemical tests was especially important. Only when each factor of physical and chemical tests on site was accurately controlled, the accurate data of physical and chemical tests on site could be obtained and accurate testing reports could be issued.
中图分类号 F253.3 DOI 10.11973/lhjy-wl201603008
所属栏目
基金项目
收稿日期 2015/7/14
修改稿日期
网络出版日期
作者单位点击查看
备注安祯钰(1982-),男,工程师。
引用该论文: AN Zhen-yu,YUE Lei. Quality Control of Physical and Chemical Tests on Petrochemical Construction Site[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2016, 52(3): 181~182
安祯钰,岳雷. 石油化工施工现场理化检验的质量控制[J]. 理化检验-物理分册, 2016, 52(3): 181~182
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】鄢国强.材料质量检测与分析技术[M].上海:中国计量出版社,2005.4.
【2】CNAS-CL01: 2006检测和校准实验室能力认可准则[S].
【3】CNAS-CL10: 2012检测和校准实验室能力认可准则在化学检测领域的应用说明[S].
【4】刘慧.关于CNAS-CL10:2012中几个重要条款的理解[J].理化检验-化学分册,2014,50(3): 371-373.
【5】王金凤, 赵敏, 王千,等.自制氨质控品用于职业卫生检测的质量控制[J].理化检验-化学分册,2014,50(12): 1579-1581.
【2】CNAS-CL01: 2006检测和校准实验室能力认可准则[S].
【3】CNAS-CL10: 2012检测和校准实验室能力认可准则在化学检测领域的应用说明[S].
【4】刘慧.关于CNAS-CL10:2012中几个重要条款的理解[J].理化检验-化学分册,2014,50(3): 371-373.
【5】王金凤, 赵敏, 王千,等.自制氨质控品用于职业卫生检测的质量控制[J].理化检验-化学分册,2014,50(12): 1579-1581.
相关信息