Interaction between High Temperature Fatigue and Creep of 1Cr18Ni9Ti Steel at Different Temperatures
摘 要
为研究不同温度下高温疲劳与蠕变的交互作用, 分别在600, 625, 650, 675, 700 ℃下对1Cr18Ni9Ti钢进行静态蠕变试验和高温疲劳-蠕变试验, 得到了蠕变寿命和高温疲劳-蠕变寿命, 并用数值模拟计算得到了不同温度下的高温疲劳寿命; 之后, 综合上述数据计算出了蠕变损伤和高温疲劳损伤, 再结合带交互作用系数的寿命预测公式得到了不同温度下高温疲劳和蠕变的交互作用系数, 最后研究了温度对交互作用系数的影响。结果表明: 温度低于625 ℃时, 交互作用系数为负数; 温度高于625 ℃时, 交互作用系数为正数; 随着温度升高, 交互作用曲线向蠕变损伤方向弯曲。
Abstract
In order to study the interaction between high temperature fatigue and creep at different temperatures, static creep and fatigue-creep tests were carried out on 1Cr18Ni9Ti steel at 600, 625, 650, 675 ℃ and 700 ℃, respectively. Creep life and high temperature fatigue-creep life were obtained by experiments, and high temperature fatigue life at different temperature was got by numerical simulation. And then, based on the above-mentioned data, creep damage and high temperature fatigue damage were calculated, the interaction coefficients between high temperature fatigue and creep at different temperature were obtained based on life prediction formula with interaction coefficient. At last, the effect of temperature on interaction coefficient was studied. The results indicate that when the temperature was below 625 ℃, the coefficient was negative and it was positive when temperature was above 625 ℃. Interaction curve bended to creep direction with the increase of temperature.
中图分类号 TG142.71 DOI 10.11973/jxgccl201603023
所属栏目 物理模拟与数值模拟
基金项目 国家自然科学基金资助项目(51301198); 中央高校基本科研业务费中国民航大学专项项目(3122013H002)
收稿日期 2015/3/16
修改稿日期 2016/1/14
网络出版日期
作者单位点击查看
备注陈亚军(1976-), 男, 吉林长春人, 副教授, 博士。
引用该论文: CHEN Ya-jun,GAO Chun-jin,YANG Xu-dong,CHU Yu-long. Interaction between High Temperature Fatigue and Creep of 1Cr18Ni9Ti Steel at Different Temperatures[J]. Materials for mechancial engineering, 2016, 40(3): 93~96
陈亚军,高春瑾,杨旭东,褚玉龙. 不同温度下1Cr18Ni9Ti钢高温疲劳与蠕变的交互作用[J]. 机械工程材料, 2016, 40(3): 93~96
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】雒设计,王荣. 热处理工艺对22Cr双相不锈钢组织的影响[J]. 机械工程材料,2007,31(2):13-15, 52.
【2】彭鸿博,张宏建. 金属材料本构模型的研究进展[J]. 机械工程材料,2012,36(3):5-10, 75.
【3】郝玉龙. P91钢蠕变特性及蠕变疲劳交互作用研究[D].成都: 西南交通大学,2005.
【4】朱顺鹏,黄洪钟,何俐萍, 等.高温低周疲劳-蠕变的改进型广义应变能损伤函数方法[J]. 航空学报,2011,32(8):1445-1452.
【5】ZHU S P, HUANG H Z. A generalized frequency separation-strain energy damage function model for low cycle fatigue-creep life prediction[J]. Fatigue & Fracture of Engineering Materials & Structures, 2010, 33(4): 227-237.
【6】颜鸣皋.中国航空材料手册 第1卷 结构钢不锈钢[M]. 北京: 中国标准出版社, 2001:817-825.
【7】范志超, 陈学东, 蒋家羚. 16MnR钢循环蠕变-疲劳交互作用损伤力学模型[J]. 固体力学学报, 2006, 27(1): 65-70.
【8】陈学东, 范志超, 陈凌, 等. 三种疲劳蠕变交互作用寿命预测模型的比较及其应用[J]. 机械工程学报, 2007,43(1): 62-68.
【9】董杰, 陈学东, 范志超,等. 316L 不锈钢的高温疲劳蠕变行为和寿命预测[J]. 材料研究学报, 2009, 23(5): 541-545.
【10】OSTERGREN W J. A damage foundation hold time and frequency effects in elevated temperature low cycle fatigue[J]. Journal of Testing and Evaluation,1976,4(5):327-339.
【11】谢锡善. 我国高温材料的应用与发展[J]. 机械工程材料,2004,28(1):2-8,11.
【12】陈凌, 蒋家羚, 范志超, 等. 低周疲劳寿命预测的能量模型探讨[J]. 金属学报, 2006, 42(2): 195-200.
【13】胡绪腾,马晓健,宋迎东. 含保载弹性应力循环下TA12钛合金缺口试样的蠕变疲劳损伤分析[J]. 机械工程材料,2013,37(3):90-94.
【2】彭鸿博,张宏建. 金属材料本构模型的研究进展[J]. 机械工程材料,2012,36(3):5-10, 75.
【3】郝玉龙. P91钢蠕变特性及蠕变疲劳交互作用研究[D].成都: 西南交通大学,2005.
【4】朱顺鹏,黄洪钟,何俐萍, 等.高温低周疲劳-蠕变的改进型广义应变能损伤函数方法[J]. 航空学报,2011,32(8):1445-1452.
【5】ZHU S P, HUANG H Z. A generalized frequency separation-strain energy damage function model for low cycle fatigue-creep life prediction[J]. Fatigue & Fracture of Engineering Materials & Structures, 2010, 33(4): 227-237.
【6】颜鸣皋.中国航空材料手册 第1卷 结构钢不锈钢[M]. 北京: 中国标准出版社, 2001:817-825.
【7】范志超, 陈学东, 蒋家羚. 16MnR钢循环蠕变-疲劳交互作用损伤力学模型[J]. 固体力学学报, 2006, 27(1): 65-70.
【8】陈学东, 范志超, 陈凌, 等. 三种疲劳蠕变交互作用寿命预测模型的比较及其应用[J]. 机械工程学报, 2007,43(1): 62-68.
【9】董杰, 陈学东, 范志超,等. 316L 不锈钢的高温疲劳蠕变行为和寿命预测[J]. 材料研究学报, 2009, 23(5): 541-545.
【10】OSTERGREN W J. A damage foundation hold time and frequency effects in elevated temperature low cycle fatigue[J]. Journal of Testing and Evaluation,1976,4(5):327-339.
【11】谢锡善. 我国高温材料的应用与发展[J]. 机械工程材料,2004,28(1):2-8,11.
【12】陈凌, 蒋家羚, 范志超, 等. 低周疲劳寿命预测的能量模型探讨[J]. 金属学报, 2006, 42(2): 195-200.
【13】胡绪腾,马晓健,宋迎东. 含保载弹性应力循环下TA12钛合金缺口试样的蠕变疲劳损伤分析[J]. 机械工程材料,2013,37(3):90-94.
相关信息