Detection Method of Ferrite Content and Composition Segregation Control of the Centrifugal Casting Main Pipe of the Nuclear Power Station
摘 要
根据RCC-M要求,CPR1000堆型压水堆核电站核岛主管道的材料为离心铸造的奥氏体-铁素体不锈钢(法国牌号Z3CN20-09M)。该试验按照MC1000章节舍夫勒图(Schaeffler)和MC1340章节的内容测定了主管道的铁素体含量,分析了不同方法检测结果的差异原因。并结合阳江项目主管道的制造经验和RCC-M M3406的内容,从金属学及离心铸造结晶凝固的特点,分析了主管道铁素体含量自管道内壁向外递增分布的原因。总结出舍夫勒图评定铁素体含量与MC1340章节测定铁素体含量方法的适用范围,以及消除主管道铁素体分布不均的方法。
Abstract
According to the requirement of RCC-M, the material of the main pipe of CPR1000 PWR nuclear power station is centrifugal casting austenitic-ferritic stainless steel (French grade Z3CN20-09M). According to Schaeffler diagram of chapter MC1000 and the content of chapter MC1340, the ferrite content of the main pipe was measured, and the causes of results difference between different methods were analyzed. Combined the manufacture experience of the main pipe of Yangjiang project and the content of chapter RCC-M M3406, the reasons why the ferrite content of the main pipe increased from inner wall to outer wall were also analyzed from metallurgy theory and the solidification characteristics of centrifugal casting. The application scope of the ferrite content measurement methods of Schaeffler diagram and chapter MC1340, and the method to eliminate the uneven distribution of ferrite in the main pipe were concluded.
中图分类号 TG142.71 DOI 10.11973/lhjy-wl201605004
所属栏目 试验技术与方法
基金项目
收稿日期 2015/9/16
修改稿日期
网络出版日期
作者单位点击查看
联系人作者李元太
备注李元太(1953-),男,高级工程师。
引用该论文: LI Yuan-tai,ZHAO Ya-jun,WANG Da-qing,HUANG Zheng-yong,ZHANG Yong-kun,JI Guo-min,CHEN Min. Detection Method of Ferrite Content and Composition Segregation Control of the Centrifugal Casting Main Pipe of the Nuclear Power Station[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2016, 52(5): 303~307
李元太,赵亚军,王大庆,黄正勇,张永坤,季国敏,陈敏. 核电站离心铸造主管道铁素体含量的检测方法及成分偏析的控制[J]. 理化检验-物理分册, 2016, 52(5): 303~307
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】RCC-M (2000版+2002补遗)压水堆核电站核岛机械设备设计与建造法则[S].
【2】吴玖.双相不锈钢[M].北京:冶金工业出版社,2000.
【3】肖纪美.不锈钢的金属学问题[M].北京:冶金工业出版社,2006.
【4】李元太.压水堆一回路管道的铸造工艺及其国产化[J].核动力工程,2009,30(S2): 6-10.
【5】李传拭,杨国杰,张振斌,等.铸造工程师手册[M].2版.北京:机械工业出版社,2005.
【2】吴玖.双相不锈钢[M].北京:冶金工业出版社,2000.
【3】肖纪美.不锈钢的金属学问题[M].北京:冶金工业出版社,2006.
【4】李元太.压水堆一回路管道的铸造工艺及其国产化[J].核动力工程,2009,30(S2): 6-10.
【5】李传拭,杨国杰,张振斌,等.铸造工程师手册[M].2版.北京:机械工业出版社,2005.
相关信息