Cable Defects Detecting Based on the Eccentric Angle Transillumination of X-Ray Imaging System
摘 要
针对电缆内部缺陷难以检测的问题, 利用X射线数字成像系统(以下简称DR), 通过合适偏心角度透照电缆缺陷并利用软件合成图像来判断缺陷特征。通过模拟现场设计不同特征的电缆缺陷, 采取合适的偏心角度透照技术进行试验, 对不同特征的电缆缺陷进行分析。将检测结果与实际的缺陷尺寸进行对比, 基于DR偏心角的电缆缺陷尺寸检测能有效提高电缆缺陷检测的精度, 为实际工程应用中对电缆内部缺陷特征的分析和后期的维护保养提供了可靠依据。
Abstract
In this paper, the difficult to detect cable internal damage problem is solved by the use of X-ray digital imaging system (hereinafter referred to as DR) through a suitable eccentric angle lens according to the cable damage and by using software to process the composite image to determine the damage characteristics. By simulating different site design features of cable damage, an appropriate eccentric angle transillumination technology experiment for the different characteristics of cable damage analysis was undertaken. By the comparison with the actual defect size, it is found that the DR based eccentric angle cable defect detection can effectively improve the cable damage detection accuracy for the practical application of the cable internal damage characteristics analysis and can offer a reliable basis for post-maintenance.
中图分类号 TM241.3 TG115.28 DOI 10.11973/wsjc201609005
所属栏目 试验研究
基金项目 云南电网有限责任公司电力科学研究院重点资助项目 (KY-N14161)
收稿日期 2016/4/22
修改稿日期
网络出版日期
作者单位点击查看
备注史腾飞(1993-),男, 硕士研究生, 主要研究方向为输电线路工程与无损检测。
引用该论文: SHI Teng-fei,MA Peng-fei,LIU Rong-hai,ZHENG Xin,CHANG Xi-mao,DUAN Xin-hui. Cable Defects Detecting Based on the Eccentric Angle Transillumination of X-Ray Imaging System[J]. Nondestructive Testing, 2016, 38(9): 17~20
史腾飞,马朋飞,刘荣海,郑 欣,常喜茂,段新会. 基于X射线成像系统偏心角透照工艺的电缆缺陷检测[J]. 无损检测, 2016, 38(9): 17~20
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】龙会国,龙毅,陈红冬.铝母线焊缝质量情况分析与对策[J].焊接技术,2011,40(5):56-59,67.
【2】赵振良,尤丽华.X射线电缆偏心度在线检测方法设计[J].2011,33(4):33-35.
【3】赵立宏,凌球,郭兰英,等.X射线电缆绝缘线芯测偏仪的研制[J].电线电缆,2003,16(3):36-37.
【4】刘全利,白世武,薛岩,等.管道环焊缝数字射线检测技术研究[J].管道技术与设备,2010(3):20-22.
【5】张祥春,蔡良续,张鹭.X射线数字透射成像图像质量影响因素分析[J].无损检测,2011,33(9):72-75.
【6】吴章勤,刘荣海,艾川,等.基于X射线数字成像技术的GIS尺寸标定[J].无损检测,2013,35(2):46-48.
【7】张俊生,王明泉,郭永亮,等.影响X射线数字成像系统分辨率的因素分析[J].CT理论与应用研究,2011,20(2),227-234.
【8】闫文斌,王达达,李卫国,等.X 射线对复合绝缘子内部缺陷的透照检测和诊断[J].高压电器,2012,48(10):58-66.
【2】赵振良,尤丽华.X射线电缆偏心度在线检测方法设计[J].2011,33(4):33-35.
【3】赵立宏,凌球,郭兰英,等.X射线电缆绝缘线芯测偏仪的研制[J].电线电缆,2003,16(3):36-37.
【4】刘全利,白世武,薛岩,等.管道环焊缝数字射线检测技术研究[J].管道技术与设备,2010(3):20-22.
【5】张祥春,蔡良续,张鹭.X射线数字透射成像图像质量影响因素分析[J].无损检测,2011,33(9):72-75.
【6】吴章勤,刘荣海,艾川,等.基于X射线数字成像技术的GIS尺寸标定[J].无损检测,2013,35(2):46-48.
【7】张俊生,王明泉,郭永亮,等.影响X射线数字成像系统分辨率的因素分析[J].CT理论与应用研究,2011,20(2),227-234.
【8】闫文斌,王达达,李卫国,等.X 射线对复合绝缘子内部缺陷的透照检测和诊断[J].高压电器,2012,48(10):58-66.
相关信息