The Wet Cleaning Experiment of the Welding Assembly Surface during Fluorescent Penetrant Inspection
摘 要
在飞机发动机大修故障检查期间, 对某三级盘焊接组合件进行荧光渗透检测时, 发现该零件表面无法被荧光渗透液完全润湿。通过对比试验, 找出了适合该组合件的表面清理方法——塑料喷丸, 使荧光渗透液能完全润湿, 保证了零件的荧光渗透检测质量。
Abstract
While doing aero-engine overhaul malfunction checking, one third stage plate welding assembly surface is failed to be wetted utterly. In this article, we did comparison experiment and tried to find methods that were suitable for the welding assembly parts surface cleaning to assure the inspections quality of the components on while fluorescent penetrant inspection.
中图分类号 TG115.28 DOI 10.11973/wsjc201609017
所属栏目 实践经验
基金项目
收稿日期 2016/1/18
修改稿日期
网络出版日期
作者单位点击查看
备注唐建朝(1986-), 男, 工程师, 主要从事航空发动机零部件的渗透检测工作。
引用该论文: TANG Jian-chao,ZHOU Jia-liang,KONG Yan. The Wet Cleaning Experiment of the Welding Assembly Surface during Fluorescent Penetrant Inspection[J]. Nondestructive Testing, 2016, 38(9): 64~65
唐建朝,周嘉梁,孔 燕. 焊接组合件表面荧光渗透检测前的润湿清洗试验[J]. 无损检测, 2016, 38(9): 64~65
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】林猷文, 任学东.渗透检测[M].北京: 机械工业出版社, 2004:1-4.
【2】HB/Z 61-1998 渗透检验[S].
【3】高晗, 喻星星.航空导管连接卡箍的荧光渗透检测[J].无损检测, 2015,37(1): 72-74.
【2】HB/Z 61-1998 渗透检验[S].
【3】高晗, 喻星星.航空导管连接卡箍的荧光渗透检测[J].无损检测, 2015,37(1): 72-74.
相关信息