Thermal Deformation Behavior of Low-cost Super High Strength Titanium Alloys and Determination of Their Forging Process
摘 要
通过使用廉价合金元素铁、碳替代昂贵的钒元素制备了低成本超高强钛合金Ti-xFe-3Al(x=7,10,12),利用Gleeble-3500型热模拟试验机研究该合金的热变形行为,在此基础上确定了该合金的锻造工艺。结果表明:Ti-xFe-3Al合金在850℃、10 s-1应变速率下变形时,应力-应变曲线的平台阶段较为平稳,且流变应力在400 MPa以下,符合实际锻造生产条件;Ti-xFe-3Al合金较佳的精锻温度为(850±20)℃;锻态合金中无剪切组织,且抗拉强度高于1 200 MPa。
Abstract
Low-cost titanium alloys (Ti-xFe-3Al) with super high strength were prepared by using low-cost alloying elements, iron and carbon, instead of higher cost vanadium element. The alloy's thermal deformation behavior was studied by using Gleeble-3500 thermal simulation tester, and forging processes of the alloys were determined. The results show that the stress-plat in stress-strain curve was more stable when deformation temperature of the alloys was 850℃ and strain rate was 10 s-1, and the flow stress was under 400 MPa. It was suitable for the forging process. Based on that, the better forging temperature of the alloys was (850±20)℃. Shearing band did not find in the as-forged alloys, and the alloy's tensile strength was over 1 200 MPa.
中图分类号 TG146.2 DOI 10.11973/jxgccl201703018
所属栏目 物理模拟与数值模拟
基金项目 国家自然科学基金资助项目(51371013)
收稿日期 2016/2/26
修改稿日期 2017/1/1
网络出版日期
作者单位点击查看
备注王同波(1989-)男,山东淄博人,硕士研究生。
引用该论文: WANG Tong-bo,LI Bo-long,YUAN Jie. Thermal Deformation Behavior of Low-cost Super High Strength Titanium Alloys and Determination of Their Forging Process[J]. Materials for mechancial engineering, 2017, 41(3): 89~92
王同波,李伯龙,袁杰. 低成本超高强钛合金的热变形行为与锻造工艺的确定[J]. 机械工程材料, 2017, 41(3): 89~92
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】胡清熊. 钛的应用及前景展望[C]//2003年钛工业年会论文集. 北京:[出版者不详], 2003:5-8.
【2】高敏, 姚丽. 国内外钛合金研究发展动态[J]. 世界有色金属, 2001(2):4-7.
【3】赵永庆, 魏建峰, 高占军, 等. 钛合金的应用及低成本制造技术[J]. 材料导报, 2003, 17(4):5-7.
【4】李珍, 孙建科. 低成本钛合金的开发及应用[J]. 稀有金属材料与工程, 2008, 37(3):973-976.
【5】ZHANG S Z, LI M M, YANG R. Mechanism and kinetics of carbide dissolution in near alpha Ti-5.6Al-4.8Sn-2Zr-1Mo-0.35Si-0.7Nd titanium alloy[J]. Materials Characterization, 2011, 62:1151-1157.
【6】高增, 牛济泰. 材料物理模拟技术的发展及其在中国的应用[J]. 机械工程材料, 2014, 38(11):1-6.
【7】孙胜英, 王江华, 梁荣, 等. 邯钢Gleeble-3500热模拟试验机的应用[J]. 河北冶金, 2012(7):59-61.
【8】董勇, 汪哲能, 张蓉. AZ61镁合金加工图及其在轧制成形中的应用[J]. 机械工程材料, 2014, 38(6):41-45.
【2】高敏, 姚丽. 国内外钛合金研究发展动态[J]. 世界有色金属, 2001(2):4-7.
【3】赵永庆, 魏建峰, 高占军, 等. 钛合金的应用及低成本制造技术[J]. 材料导报, 2003, 17(4):5-7.
【4】李珍, 孙建科. 低成本钛合金的开发及应用[J]. 稀有金属材料与工程, 2008, 37(3):973-976.
【5】ZHANG S Z, LI M M, YANG R. Mechanism and kinetics of carbide dissolution in near alpha Ti-5.6Al-4.8Sn-2Zr-1Mo-0.35Si-0.7Nd titanium alloy[J]. Materials Characterization, 2011, 62:1151-1157.
【6】高增, 牛济泰. 材料物理模拟技术的发展及其在中国的应用[J]. 机械工程材料, 2014, 38(11):1-6.
【7】孙胜英, 王江华, 梁荣, 等. 邯钢Gleeble-3500热模拟试验机的应用[J]. 河北冶金, 2012(7):59-61.
【8】董勇, 汪哲能, 张蓉. AZ61镁合金加工图及其在轧制成形中的应用[J]. 机械工程材料, 2014, 38(6):41-45.
相关信息