Measurement of High-temperature Elastic Modulus of Titanium Alloys by Creep Tests
摘 要
由于钛合金高温弹性模量的测试比较困难,一般设计和使用中多以经验和理论值作为依据,缺乏实际测试依据。对此,通过分析材料的弹性模量和蠕变试验特点,提出利用蠕变试验机测试钛合金高温弹性模量的试验方法,并通过BT25和TC4两种钛合金棒材在不同温度和应力下的蠕变试验测试其高温弹性模量。结果表明:利用蠕变试验机测得的钛合金高温弹性模量数据集中,且相比通过拉伸试验机测得的结果精度更高。
Abstract
Due to the difficulty in measuring the elastic modulus of titanium alloy at high temperature, it is usually based on empirical and theoretical values in the design and application. Based on the analysis of the elastic modulus and creep test characteristics of materials, a test method for measuring the high-temperature elastic modulus of titanium alloys by the creep testing machine was put forward. Through creep test data of two kinds of BT25 and TC4 titanium alloys under different temperature and stress, the high-temperature elastic modulus was obtained. The results show that: the data of high-temperature elastic modulus of titanium alloys obtained by the creep testing machine were concentrated, and the precision was better compared with those of the results obtained by tensile testing machines.
中图分类号 TG115.5+7 DOI 10.11973/lhjy-wl201703008
所属栏目 试验技术与方法
基金项目
收稿日期 2016/7/12
修改稿日期
网络出版日期
作者单位点击查看
备注李荣(1984-),男,工程师,从事稀有金属检测及工艺评估,273647279@qq.com。
引用该论文: LI Rong,LI Zheng-jia,SU Li-feng,XU Lu,WU Jing-jing. Measurement of High-temperature Elastic Modulus of Titanium Alloys by Creep Tests[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2017, 53(3): 182~184
李荣,李正佳,苏丽凤,许陆,武晶晶. 利用蠕变试验测试钛合金高温弹性模量[J]. 理化检验-物理分册, 2017, 53(3): 182~184
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】刘智恩.材料科学基础[M].2版.西安:西北工业大学出版社,2003.
【2】郑修麟.材料的力学性能[M].西安:西北工业大学出版社,2004.
【3】GB/T 2039-2012金属拉伸蠕变及持久试验方法[S].
【4】YB/T 5350-2006金属材料高温弹性模量测量方法圆盘振子法[S].
【5】GB/T 228.2-2015金属材料拉伸试验第2部分:高温试验方法[S].
【6】《理化检验-物理分册》编辑部.GB/T 228.2-2015《金属材料拉伸试验第2部分:高温试验方法》简介[J].理化检验-物理分册,2016,52(6):369-369.
【2】郑修麟.材料的力学性能[M].西安:西北工业大学出版社,2004.
【3】GB/T 2039-2012金属拉伸蠕变及持久试验方法[S].
【4】YB/T 5350-2006金属材料高温弹性模量测量方法圆盘振子法[S].
【5】GB/T 228.2-2015金属材料拉伸试验第2部分:高温试验方法[S].
【6】《理化检验-物理分册》编辑部.GB/T 228.2-2015《金属材料拉伸试验第2部分:高温试验方法》简介[J].理化检验-物理分册,2016,52(6):369-369.
相关信息