Development of Tandem Scanning Frame for Ultrasonic Testing of Welds in Offshore Steel Structure
摘 要
结合超声检测串列式扫查的原理和特点,开发出一套适用于海洋钢结构厚板K型或单V型坡口焊缝的串列式扫查装置。使用此装置进行了验证试验,结果表明:该装置降低了检测的人力工时投入,提高了检验准确率,达到了稳定、快速检测垂直于扫查面的面状缺陷(如坡口未熔合、中心裂纹等)的目的。
Abstract
Based on the principle and characteristics of ultrasonic tandem scanning, this paper develops a series of tandem scanning devices which are suitable for type K or single-bevel-groove welds of offshore steel structure. The experiment is carried out by using this device, and the results indicate that the device reduces the labor hour investment for this seam examination, improves the inspection accuracy, achieves a stable and rapid detection of surface defects perpendicular to the scan surface (such as incomplete fusion, cracks and other defects of the center).
中图分类号 TG115.28 DOI 10.11973/wsjc201704017
所属栏目 仪器研制
基金项目
收稿日期 2016/10/15
修改稿日期
网络出版日期
作者单位点击查看
备注贾刘仁(1984-),男,本科,主要从事海洋钢结构的无损检测和人员培训工作。
引用该论文: JIA Liu-ren,WANG Meng,MA Hai-bin,YANG Guang,ZHANG Fu-chun. Development of Tandem Scanning Frame for Ultrasonic Testing of Welds in Offshore Steel Structure[J]. Nondestructive Testing, 2017, 39(4): 80~81
贾刘仁,王猛,马海滨,杨光,张富春. 海洋钢结构焊缝超声检测串列式扫查架的开发[J]. 无损检测, 2017, 39(4): 80~81
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
相关信息