扫一扫 加微信
首页 > 期刊论文 > 论文摘要
超声相控阵全聚焦法成像检测
          
Ultrasonic Phased Array Imaging Testing by Total Focusing Method

李衍  
摘    要
超声相控阵全聚焦法(TFM)是用全矩阵捕获模式(FMC)获取的数据来进行信号处理的,所有计算均以30帧/s的刷新率完成。与标准相控阵法相比,全聚焦法成像分辨力甚高,能优化缺陷的定位、定量、表征等,并可对形状复杂试件进行检测。综述了超声相控阵全聚焦法成像检测的典型工业应用,并作了相关讨论,以供国内同行借鉴。
标    签 超声相控阵   全矩阵捕获   全聚焦法   成像检测   ultrasonic phased array   full matrix capture(FMC)   total focusing method   imaging inspection  
 
Abstract
The total focusing method (TFM) is a signal processing algorithm using data acquired in full matrix capture mode (FMC). All computations are achieved at a refresh rate up to 30 frames per second. In comparison with standard phased array techniques, this method can provide higher resolution, optimizing flaw location, measurement and characterization. Also, TFM can be used to image complex components. This article gives some typical cases of application of phased array TFM in industrial inspection and discussion on the relevant issues in order to provide references to domestic colleagues.

中图分类号 TG115.28   DOI 10.11973/wsjc201705013

 
  中国光学期刊网论文下载说明


所属栏目 超声相控阵检测技术应用专题

基金项目

收稿日期 2016/12/19

修改稿日期

网络出版日期

作者单位点击查看


备注李衍(1940-),男,高级工程师,主要从事承压设备的无损检测工作

引用该论文: LI Yan. Ultrasonic Phased Array Imaging Testing by Total Focusing Method[J]. Nondestructive Testing, 2017, 39(5): 57~64
李衍. 超声相控阵全聚焦法成像检测[J]. 无损检测, 2017, 39(5): 57~64


论文评价
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
分享论文
分享到新浪微博 分享到腾讯微博 分享到人人网 分享到 Google Reader 分享到百度搜藏分享到Twitter

参考文献
【1】BOULAVINOV A.Sampling phased array a new technique for signal processing and ultrasonic imaging[C]//7th ECNDT.Berlin:[s.n], 2006.
 
【2】JOBST M, CONNOLLY G.Demonstration of the application of the total focusing method to the inspections of steel welds[C]//9th ECNDT.Moscow:[s.n], 2010.
 
【3】李衍. ASME标准新版中有关相控阵超声成像检测的要点评析第一部分:两种方法要求[J].无损检测,2015,37(7):6-9.
 
【4】ASTM E2491 Guide for evaluating performance characteristics of phased-array ultrasonic testing instruments and systems[S].
 
【5】WOLFRAM A. High resolution phased array imaging using the total focusing method[C]//19th WCNDT. Munich:[s.n], 2016.
 
【6】MICHAEL B, STEFAN K. Practical application of total focusing for sizing of imperfections in welded joints[C]//19th WCNDT. Munich:[s.n], 2016.
 
【7】CHOO N, JIN K, CHOI W, et al. Ultrasound phased array imaging on curved surface for weld inspection of elbow pipe as a replacement for radiographic inspection[C]//19th WCNDT.Munich:[s.n],2016.
 
【8】BIRD C R. Ultrasonic phased array inspection technology for the evaluation of friction stir welds[J]. Insight, 2004, 46(1):31-36.
 
【9】朱德才,王东,李予卫,等. 一种压水堆核电站主管道窄间隙自动焊焊缝的超声检测方法[J]. 无损检测,2014,36(5):58-61.
 
【10】王悦民,李衍,陈和坤. 超声相控阵检测技术和应用[M].北京:国防工业出版社,2014.
 
【11】JEUNE L L,ROBERT S,DYMUS P. Adaptive ultrasonic imaging with the total focusing method for inspection of complex components immersed in water[J]. Ultrasonics, 2014, 61:673-684.
 
【12】ROBERTI S, OLIVIER C. Real-time inspection of complex composite structures with a self-adaptive ultrasonic technique[C]//18th WCNDT.Durban:[s.n],2012.
 
相关信息
   标题 相关频次
 全矩阵捕获和全聚焦法相控阵成像检测技术
 4
 缺陷的多模式全聚焦三维重构
 3
 ASME 2013 NDE中有关相控阵超声成像检测的要点评析第二部分: 计算机成像技术(续)
 2
 ASME2013NDE中有关相控阵超声成像检测的要点评析第二部分:计算机成像技术
 2
 ASME标准新版中有关相控阵超声成像检测的要点评析第一部分:两种方法要求
 2
 ASME标准新版中有关相控阵超声成像检测的要点评析第一部分:两种方法要求(续)
 2
 CIVA仿真软件在核电厂汽轮机叶根相控阵检测中的应用
 2
 奥氏体不锈钢管道环焊缝的超声相控阵检测
 2
 奥氏体不锈钢厚壁对接焊缝的超声相控阵CIVA仿真与试验
 2
 奥氏体不锈钢小径薄壁管焊缝超声相控阵检测工艺
 2
 采用超声相控阵技术检测汽轮机转子叉型叶根
 2
 采油树阀门的超声相控阵检测
 2
 超超临界锅炉小径管焊缝的超声相控阵检测工艺
 2
 超声波相控阵黄金纯度检测技术
 2
 超声相控阵成像方法研究
 2
 超声相控阵成像仿真系统研制
 2
 超声相控阵成像仿真系统研制
 2
 超声相控阵成像系统软件设计
 2
 超声相控阵法测量材料的弹性模量
 2
 超声相控阵技术的发展及其在核工程无损检测中的应用
 2
 超声相控阵技术的仿真试验
 2
 超声相控阵技术在管材检测中的应用
 2
 超声相控阵技术在航空复合材料结构无损检测中的应用及发展
 2
 超声相控阵检测成像系统软件设计
 2
 超声相控阵检测高速数据采集系统设计
 2
 超声相控阵井壁成像检测的回波信号处理
 2
 超声相控阵声束控制特性分析
 2
 超声相控阵探头的形式以及专用相控阵探头的开发应用案例
 2
 超声相控阵系统中高精度相控发射和相控信号并行处理的实现
 2
 承压设备插入式接管角焊缝超声相控阵检测工艺
 2