采用电化学方法研究了温度、Cl^-以及SO₄^2-含量对不锈钢板S30403、S32101和S32205在硼酸溶液中点蚀行为的影响。结果表明：3种材料的点蚀电位（E_b）和再钝化电位（E_r）均随Cl^-含量的升高而降低，S32205不锈钢的点蚀电位和再钝化电位普遍高于S32101和S30403不锈钢的；存在临界温度（约60℃），当温度高于临界温度，S32205不锈钢的点蚀电位大幅降低，再钝化电位的临界温度介于40~60℃；SO₄^2-含量对3种材料点蚀电位和再钝化电位的影响不明显。S32205不锈钢的耐点蚀性能优于S32101和S30403不锈钢的，而S32101和S30403不锈钢的耐点蚀性能相当。

The effects of temperature, Cl^- content and SO₄^2- content on pitting behavior of S30403, S32101 and S32205 stainless steel plates in boric acid solution were studied by electrochemical methods. The results show that pitting potential (E_b) and repassivation potential (E_r) of those three materials declined when increasing the content of Cl^-, pitting potential and repassivation potential of S32205 stainless steel were higher than those of S32101 and S30403 stainless steels. A critical temperature (about 60℃) existed, when the temperature was higher than the critical temperature, the pitting potential decreased obviously. Critical temperature for repassivation potential was in the range of 40~60℃. The effect of the content of SO₄^2- on pitting potential and repassivation potential for three materials was little. The pitting corrosion resistance of S32205 stainless steel is more excellent than that of S30403 and S32101 stainless steels in different experimental conditions, while the pitting corrosion resistance of S30403 and S32101 stainless steels is equivalent.