Comparative Analysis on GB and ASTM Standards for Tensile Property Test Method of Polymer Matrix Composite Materials
摘 要
全面对比分析了聚合物基复合材料拉伸性能试验方法美标ASTM D3039-14和国标GB/T 3354-2014的主要异同点,并对相关规定进行了理论及试验分析。结果表明:国标在试验环境条件、试样、试验设备、试验程序、试验报告等方面均有别于美标,二者可相互借鉴完善,并结合更多新材料测试的需求不断更新,考虑复杂试验环境和特殊情况,从而制定更适合我国航空航天工业及高端制造业的聚合物基复合材料拉伸性能试验方法标准。
Abstract
The main similarities and differences between ASTM D3039-14 and GB/T 3354-2014 (the American and China standards for tensile property test method of polymer matrix composite materials) were comprehensively analyzed and compared, and some regulations in these two standards were theoretically analyzed and tested. The results show GB standard is different from ASTM standard in the aspects of test environment condition, test specimens, test equipments, test procedures, test reports and so on. These two standards can learn from each other and constantly update and perfect to meet the test demands of more new materials and to consider some complex test environment and special conditions, so as to develop a standard for tensile property test method of polymer matrix composite materials which is more suitable for China's aerospace and high-end manufacturing industry.
中图分类号 TB332 DOI 10.11973/lhjy-wl201708004
所属栏目 专题报道(硬度试验与拉伸试验)
基金项目 国家自然科学基金资助项目(51402356);中国民航大学科研启动基金资助项目(2010QD12X)
收稿日期 2016/8/8
修改稿日期
网络出版日期
作者单位点击查看
备注牛一凡(1979-),女,副教授,博士,主要从事复合材料耐久性及力学性能损伤机制研究,yifan.niu@foxmail.com
引用该论文: NIU Yifan,GAO Sai,WANG Xiaorui. Comparative Analysis on GB and ASTM Standards for Tensile Property Test Method of Polymer Matrix Composite Materials[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2017, 53(8): 548~552
牛一凡,高赛,王晓瑞. 聚合物基复合材料拉伸性能试验方法国标和美标的对比分析[J]. 理化检验-物理分册, 2017, 53(8): 548~552
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】GB/T 3354-2014定向纤维增强聚合物基复合材料拉伸性能试验方法[S].
【2】刘久战,蔡安,张晓静,等.中国民用飞机航空材料和材料标准体系研究探讨[J].航空制造技术,2012(12):68-71,76.
【3】ASTM D3039-14 Standard test method for tensile properties of polymer matrix composite materials[S].
【4】宋昌哲,张程煜,乔生儒,等.试样几何形状和尺寸对C/C复合材料拉伸强度的影响[J].固体火箭技术,2010,33(3):349-352.
【5】冯家臣,彭刚,王绪财.试样尺寸对纤维增强复合材料动态压缩试验结果影响的研究[C]//第七届全国爆炸力学实验技术学会会议论文集.宁波:[出版者不详],2012.
【6】岳清瑞,曹劲松,杨勇新,等.碳纤维布标准检测方法中试件尺寸影响的试验研究[J].工业建筑,2005,35(8):1-4.
【7】李建国.树脂基纤维增强复合材料拉伸试验的影响因素[J].理化检验-物理分册,2013,49(7):444-447,488.
【8】郑道德,吴继善."塑料试样状态调节和试验的标准环境"国家标准简介[J].化工标准化,1983(1):20-24,28.
【2】刘久战,蔡安,张晓静,等.中国民用飞机航空材料和材料标准体系研究探讨[J].航空制造技术,2012(12):68-71,76.
【3】ASTM D3039-14 Standard test method for tensile properties of polymer matrix composite materials[S].
【4】宋昌哲,张程煜,乔生儒,等.试样几何形状和尺寸对C/C复合材料拉伸强度的影响[J].固体火箭技术,2010,33(3):349-352.
【5】冯家臣,彭刚,王绪财.试样尺寸对纤维增强复合材料动态压缩试验结果影响的研究[C]//第七届全国爆炸力学实验技术学会会议论文集.宁波:[出版者不详],2012.
【6】岳清瑞,曹劲松,杨勇新,等.碳纤维布标准检测方法中试件尺寸影响的试验研究[J].工业建筑,2005,35(8):1-4.
【7】李建国.树脂基纤维增强复合材料拉伸试验的影响因素[J].理化检验-物理分册,2013,49(7):444-447,488.
【8】郑道德,吴继善."塑料试样状态调节和试验的标准环境"国家标准简介[J].化工标准化,1983(1):20-24,28.
相关信息