Measurement Uncertainty Evaluation on Fatigue Testing Results
摘 要
首先分析了疲劳试验结果测量不确定度的主要来源,然后采用不确定度传递律(GUM)评定方法,并结合旋转弯曲疲劳试验结果给出了成组法测定给定应力下疲劳寿命和升降法测定给定疲劳寿命下疲劳强度的测量不确定度的评定过程和结果。结果表明:可采用GUM法对旋转弯曲疲劳试验结果进行测量不确定度评定,成组法和升降法分别是确定疲劳寿命和疲劳强度的主要方法,该文介绍的评定方法对其他类型的疲劳试验结果的测量不确定度评定有一定的参考价值。
Abstract
The major sources of measurement uncertainty of fatigue testing results were analyzed. By adopting evaluation method of uncertainty transfer law (GUM method) and combined with the results of rotating bending fatigue testing, the measurement uncertainty evaluation procedure and results of fatigue life under given stress determined by group method and fatigue strength under given fatigue life determined by up-and-down method were given. The results show that GUM method can be used to evaluate the measurement uncertainty of the results of rotating bending fatigue testing. The group method and the up-and-down method are main methods to determine the fatigue life and fatigue strength, and the evaluation method introduced in this paper has a certain reference value for evaluation of the measurement uncertainty on other fatigue testing results.
中图分类号 TB114.3 TB302.1 DOI 10.11973/lhjy-wl201710005
所属栏目 试验与研究
基金项目
收稿日期 2016/12/21
修改稿日期
网络出版日期
作者单位点击查看
备注冉学臣(1963-),男,研究员级高级工程师,主要从事力学计量、力学性能测试和疲劳试验工作,gf5012@126.com
引用该论文: RAN Xuechen. Measurement Uncertainty Evaluation on Fatigue Testing Results[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2017, 53(10): 717~719
冉学臣. 疲劳试验结果测量不确定度评定[J]. 理化检验-物理分册, 2017, 53(10): 717~719
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】GB/T 4337-2015金属材料疲劳试验旋转弯曲方法[S].
【2】JJF 1059.1-2012测量不确定度评定与表示[S].
【3】黄镇同.疲劳应用统计学[M].北京:国防工业出版社,1986.
【4】GB/T 24167-2009金属材料疲劳试验数据统计方案和分析方法[S].
【5】何雪浤,谢伟涛.几种常用的金属材料疲劳极限试验方法[J].理化检验-物理分册,2015,51(6):388-393.
【6】白鑫,谢里阳,任俊刚,等.金属材料疲劳试验与数据处理方法[J].理化检验-物理分册,2015,51(6):375-380.
【2】JJF 1059.1-2012测量不确定度评定与表示[S].
【3】黄镇同.疲劳应用统计学[M].北京:国防工业出版社,1986.
【4】GB/T 24167-2009金属材料疲劳试验数据统计方案和分析方法[S].
【5】何雪浤,谢伟涛.几种常用的金属材料疲劳极限试验方法[J].理化检验-物理分册,2015,51(6):388-393.
【6】白鑫,谢里阳,任俊刚,等.金属材料疲劳试验与数据处理方法[J].理化检验-物理分册,2015,51(6):375-380.
相关信息