核电站安全壳监检测技术发展现状及探讨
Development Status and Discussion of Monitoring Technology for the Safety Shell in Nuclear Power Station
摘 要
介绍了核电站安全壳监检测技术的现状，同时对国内外的安全壳检测技术进行充分对比，探讨了安全壳监检测系统的搭建，对安全壳检查的关键指标和检查方法做了探索与可行性分析，对安全壳检测标准的制定提出了建议和展望，为建立完整的核电站安全壳检测及自动化监测系统提供支撑。
检测技术
监测系统
发展现状
containment
detection technology
monitoring system
development status
Abstract
This paper introduces the status of nuclear power plant containment detection technology. At the same time, the domestic and foreign security shell detection technology is fully compared. The key indicators and inspection methods of the containment inspection are explored and analyzed feasibly, and the development of the safety shell detection standards are proposed and prospected, which provides a strong support for the establishment of a complete nuclear power safety shell detection and automation monitoring system.
中图分类号 TG115.28 DOI 10.11973/wsjc201710007
所属栏目 2022远东无损检测新技术论坛论文精选
基金项目
收稿日期 2017/6/25
修改稿日期
网络出版日期
作者单位点击查看
备注华雄飞(1985-),男,硕士,工程师,主要从事核电站役前、在役无损检测工作
引用该论文: HUA Xiongfei,ZHANG Song,MEI Yijun. Development Status and Discussion of Monitoring Technology for the Safety Shell in Nuclear Power Station[J]. Nondestructive Testing, 2017, 39(10): 28～32
华雄飞,张松,梅义俊. 核电站安全壳监检测技术发展现状及探讨[J]. 无损检测, 2017, 39(10): 28～32
共有人对该论文发表了看法，其中：
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】林诚格,刘志弢,赵瑞昌.压水堆失水事故最佳估算方法研究[J].北京核安全,2010(1):1-12.
【2】丁红丽,徐秉业,范钦珊.安全壳钢衬的初始后屈服曲分析[J].工程力学,1996,13(2):43-49.
【2】丁红丽,徐秉业,范钦珊.安全壳钢衬的初始后屈服曲分析[J].工程力学,1996,13(2):43-49.
相关信息
