Measurement Uncertainty Evaluation on Porosity Rate of Sintered Metal Materials
摘 要
对烧结金属材料在开孔率测定过程中的不确定度来源进行了分析,并对开孔率测定结果的不确定度进行了评定。结果表明:烧结金属材料开孔率测定的不确定度来源主要包括称量试样在空气中的质量、在水中完全浸润的质量、在空气中被水完全浸润的质量引入的不确定度以及数值修约等;某烧结金属转子衬套开孔率测定结果的不确定度报告为K=26.4%,U=0.2%,k=2(K为开孔率,U为扩展不确定度,k为包含因子)。
Abstract
The uncertainty sources in measurement of porosity rate of sintered metal materials were analyzed, and the uncertainty of the measurement results was evaluated. The results show that the uncertainty sources in measurement of porosity rate of the sintered metal materials mainly come from weighing sample's mass in air, sample's mass in water with water completely be soaked in and sample's mass in air with water completely be soaked in, data rounding and so on. The uncertainty report of measuring porosity rate of a sintered metal rotor bush was as following:K=26.4%,U=0.2%,k=2 (K being the porosity rate, U being the extended uncertainty, and k being the coverage factor).
中图分类号 TF125 DOI 10.11973/lhjy-wl201712008
所属栏目 试验技术与方法
基金项目
收稿日期 2016/1/6
修改稿日期
网络出版日期
作者单位点击查看
备注程柄午(1989-),男,助理工程师,主要从事金属材料力学性能检测工作,chengbingwu2321614@163.com
引用该论文: CHENG Bingwu,WU Jiajie,HUANG Xudong,XU Hejun. Measurement Uncertainty Evaluation on Porosity Rate of Sintered Metal Materials[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2017, 53(12): 885~888
程柄午,吴嘉杰,黄旭东,许鹤君. 烧结金属材料开孔率测定的不确定度评定[J]. 理化检验-物理分册, 2017, 53(12): 885~888
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】王承忠. 测量不确定度基本原理和评定方法及在材料检测中的评定实例[J]. 理化检验-物理分册,2013,49(9):597-604,617;2013,49(10):668-673;2013,49(11):756-758;2013,49(12):823-826.
【2】CNAS-CL01:2006/(ISO)/IEC 17025:2005 检测和校准实验室能力认可准则[S].
【3】GB/T 5163-2006 烧结金属材料(不包括硬质合金)可渗性烧结金属材料 密度、含油率和开孔率的测定[S].
【4】JJF 1059.1-2012 测量不确定度评定与表示[S].
【5】CNAS-GL10:2006 材料理化检验测量不确定度评估指南及实例[S].
【2】CNAS-CL01:2006/(ISO)/IEC 17025:2005 检测和校准实验室能力认可准则[S].
【3】GB/T 5163-2006 烧结金属材料(不包括硬质合金)可渗性烧结金属材料 密度、含油率和开孔率的测定[S].
【4】JJF 1059.1-2012 测量不确定度评定与表示[S].
【5】CNAS-GL10:2006 材料理化检验测量不确定度评估指南及实例[S].
相关信息