Experiments on Acoustic Emission Testing of Pressure Pipeline
摘 要
用无缝钢管、大小头、弯头、三通、流量计、带裂纹管段、声发射检测仪等建立了一套压力管道声发射检测系统,并进行了相关试验。分析了压力管道承载压力与20钢焊接裂纹缺陷活动性的关系;指出了在低流速情况下,介质在大小头、弯头处的折流冲击不会产生连续声发射信号。可为压力管道声发射检测技术的现场应用提供参考。
Abstract
An acoustic emission testing system for pressure pipeline was constructed with seamless steel pipes, reducers, elbows, tees, flow meters, pipes with cracks, and acoustic emission detector etc. The experiments were carried out with the system. We analyzed the relationship between the loading pressure and the weld crack activity of 20 steel pipe, and we found out the impact of the media would not cause a continuous acoustic emission signal on the reducer and the elbow in the case of low flow velocity. The study provided reference for the field application of pressure pipeline acoustic emission testing.
中图分类号 TG115.28 DOI 10.11973/wsjc201712013
所属栏目 试验研究
基金项目 泸州市科技计划资助项目(2013-G-8)
收稿日期 2017/5/5
修改稿日期
网络出版日期
作者单位点击查看
备注赵恒忠(1970-),男,高级工程师,主要从事特种设备检验检测工作
引用该论文: ZHAO Hengzhong,ZHANG Congbin,ZHOU Xueqiao. Experiments on Acoustic Emission Testing of Pressure Pipeline[J]. Nondestructive Testing, 2017, 39(12): 54~56
赵恒忠,张从彬,周学乔. 压力管道声发射检测试验[J]. 无损检测, 2017, 39(12): 54~56
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】汪文有.压力管道泄漏的声发射检测技术[J].无损检测,2016,38(3):22-24.
【2】吴旭景,杜斌,叶陈.基于EMD和小波分解的管道泄漏声发射源定位[J].无损检测,2015,37(10):60-63.
【3】刘延军,王琼,戴光,等.夹套结构内管泄漏声源特性与声发射检测[J].无损检测,2015,37(1):64-66.
【4】刘延军,戴光,王琼,等.夹套反应器内管泄漏声发射检测[J].无损检测,2015,37(3):19-21.
【5】沈士明.含缺陷承压设备安全分析技术[M].北京:中国石化出版社,2011.
【2】吴旭景,杜斌,叶陈.基于EMD和小波分解的管道泄漏声发射源定位[J].无损检测,2015,37(10):60-63.
【3】刘延军,王琼,戴光,等.夹套结构内管泄漏声源特性与声发射检测[J].无损检测,2015,37(1):64-66.
【4】刘延军,戴光,王琼,等.夹套反应器内管泄漏声发射检测[J].无损检测,2015,37(3):19-21.
【5】沈士明.含缺陷承压设备安全分析技术[M].北京:中国石化出版社,2011.
相关信息