Ultrasonic Testing of Filling Degree of Grouting Material in Monolithic Precast Concrete Building
摘 要
介绍了适用于装配整体式混凝土构件的浆锚施工节点,以及水平黏结缝中灌浆料充盈度的超声波检测方法。该方法不仅具有无损检测的技术特点,而且检测部位以及检测比例可以根据实际需要任意选取。采用高频、小直径辐射端面的换能器是该检测方法的关键,在研究中开发的超声波同心圆等距检测方法是在传统超声波检测技术上的创新。依据声速、波幅等声学参量检测灌浆料充盈度的判别原则,通过相同位置检测数据的比对分析,能有效地检测出装配整体式混凝土建筑灌浆施工中存在的缺陷。
Abstract
The ultrasonic testing of filling degree of grouting material in grout-filled hole and horizontal seam of precast concrete components is introduced. This method has the characteristics of nondestructive testing, and both testing position and ratio can be selected according to actual needs. Using transducers with high frequency and small diameter of radiation end is the key factor and the ultrasonic testing method with concentric circle equidistance is an innovation based on the traditional ultrasonic testing technology. With the judgment criterion by acoustic parameters of velocity and amplitude, the grouting defects in monolithic precast concrete building can be judged by comparing the data from the same testing region.
中图分类号 TU758.14 TG115.28 DOI 10.11973/wsjc201801005
所属栏目 试验研究
基金项目 上海市科委课题资助项目(16DZ1201805)
收稿日期 2017/6/22
修改稿日期
网络出版日期
作者单位点击查看
备注童寿兴(1952-),男,副教授,主要从事混凝土非破损检测技术的研究
引用该论文: TONG Shouxing,WANG Lei,GAO Rundong,WANG Zhuolin. Ultrasonic Testing of Filling Degree of Grouting Material in Monolithic Precast Concrete Building[J]. Nondestructive Testing, 2018, 40(1): 20~24
童寿兴,王磊,高润东,王卓琳. 装配整体式混凝土建筑灌浆料充盈度的超声检测[J]. 无损检测, 2018, 40(1): 20~24
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】高润东,李向民, 张富文, 等. 基于X射线工业CT技术的套筒灌浆密实度检测试验[J]. 无损检测, 2017, 39(4):6-11, 37.
【2】刘辉,李向民, 许清风. 冲击回波法在套筒灌浆密实度检测中的试验[J]. 无损检测, 2017, 39(4):12-16.
【3】林维正. 土木工程质量无损检测技术[M]. 北京:中国电力出版社,2008.
【2】刘辉,李向民, 许清风. 冲击回波法在套筒灌浆密实度检测中的试验[J]. 无损检测, 2017, 39(4):12-16.
【3】林维正. 土木工程质量无损检测技术[M]. 北京:中国电力出版社,2008.
相关信息