Application of Radiographic Detection in Soldered Joint of Buried Polyethylene Pipes for Gas
摘 要
聚乙烯材料衰减系数比金属材料小,理论上可以用射线检测方法对其进行检测。通过试验,选择合适的曝光脉冲数和焦距,对含3种人工缺陷的聚乙烯管道焊接接头进行射线检测,发现对于体积型缺陷的检出率高,而对于面积型缺陷较难检出,说明射线检测适用于检测聚乙烯管道焊接接头中的体积型缺陷。
Abstract
The attenuation coefficient of polyethylene material is smaller than that of metal material and theoretically it is possible to use a ray detection method. Through the experiment, in which the appropriate number of exposure pulses and focal lengths were selected, three kinds of artificial defects in soldered joint of buried polyethylene pipes were tested by radiation and it was found that the detection rate for volume type defects was high, whereas it was difficult to detect the area type defects. It is shown that ray detection is applicable while detecting volume defects in soldered joint of polyethylene pipes.
中图分类号 TG115.28 DOI 10.11973/wsjc201802008
所属栏目 试验研究
基金项目
收稿日期 2017/5/24
修改稿日期
网络出版日期
作者单位点击查看
联系人作者邵翔(644929414@qq.com)
备注邵翔(1989-),男,质量工程师,主要从事特种承压设备的检验工作
引用该论文: SHAO Xiang,ZHANG Shengjun,WU Wendong. Application of Radiographic Detection in Soldered Joint of Buried Polyethylene Pipes for Gas[J]. Nondestructive Testing, 2018, 40(2): 35~37
邵翔,张胜军,吴文栋. 射线检测在燃气用埋地聚乙烯管道焊接接头中的应用[J]. 无损检测, 2018, 40(2): 35~37
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】夏纪真.无损检测导论[M].广州:中山大学出版社,2010:7.
【2】李孟喜.无损检测[M].北京:机械工业出版社,2011:5.
【3】刘贵民,马丽丽.无损检测技术[M].北京:国防工业出版社,2010:137.
【4】施克仁,郭寓岷.相控阵超声成像检测[M].北京:高等教育出版社,2010:26.
【5】强天鹏.射线检测[M].北京:中国劳动社会保障出版社,2007:18.
【2】李孟喜.无损检测[M].北京:机械工业出版社,2011:5.
【3】刘贵民,马丽丽.无损检测技术[M].北京:国防工业出版社,2010:137.
【4】施克仁,郭寓岷.相控阵超声成像检测[M].北京:高等教育出版社,2010:26.
【5】强天鹏.射线检测[M].北京:中国劳动社会保障出版社,2007:18.
相关信息