Stress Concentration Evaluation of 45 Steel Based on Magnetic Memory Detection Method
摘 要
在离线情况下,利用金属磁记忆二维扫查装置测量45钢试样的磁记忆信号二维分量。通过对磁记忆信号二维分量进行微分处理得到相关分量的梯度,进而合成磁记忆信号的李萨如图形。通过分析李萨如图形区域面积与拉伸载荷之间的变化特性,对材料中应力集中进行定量评估。试验结果表明:对试样进行拉伸时,缺口处磁记忆信号变化特征比较显著,有利于对应力集中位置的确定;切向分量的信号峰值与拉伸载荷之间的相关性更好;李萨如图形区域面积大小与拉伸载荷呈正相关变化趋势,通过对李萨如图形面积大小进行非线性拟合可得到材料的应力集中定量评估判定曲线。
Abstract
In the case of offline, the magnetic memory signal of the 45 steel sample was measured by a metal magnetic memory two-dimensional scanning device. The two-dimensional components of the magnetic memory signal are subjected to differential processing to obtain the gradient of the relevant components, and the Lissajous graph of the magnetic memory signal is synthesized. By analyzing the variation characteristics between the area and the tensile load of the image, the stress concentration in the material can be quantitatively evaluated. The experimental results show that the change of the magnetic memory signal in the gap is significant when the specimen is stretched, which is favorable for the determination of the stress concentration. The correlation between the peak value of the tangential component and the tensile load is better. The size of the area is positively correlated with the tensile load, and the curve of the stress concentration of the material can be obtained by nonlinear fitting of the size of the image area.
中图分类号 TG115.28 DOI 10.11973/wsjc201802009
所属栏目 试验研究
基金项目 国家自然科学基金资助项目(51265041);国家重大科学仪器设备开发专项(2013YQ140505);国家公益性行业科研专项(201510066);江西省教育厅基金资助项目(GJJ151545);无损检测技术教育部重点实验室开放基金资助项目(EW201708252)
收稿日期 2017/9/8
修改稿日期
网络出版日期
作者单位点击查看
备注张路根(1965-),男,高级工程师,主要从事无损检测研究工作
引用该论文: ZHANG Lugen,LAN Qingsheng,ZHANG Qi,QI Ganping,LI Ping,SONG Kai. Stress Concentration Evaluation of 45 Steel Based on Magnetic Memory Detection Method[J]. Nondestructive Testing, 2018, 40(2): 38~41
张路根,兰清生,张琦,漆赣平,李平,宋凯. 基于磁记忆检测方法的45钢应力集中评价[J]. 无损检测, 2018, 40(2): 38~41
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】任吉林,林俊明.电磁无损检测[M].北京:科学出版社,2008.
【2】DOUBOV A A. Screening of weld quality using the magnetic metal memory effect[J]. 1998, 41:196-199.
【3】DUBOV A A. Development of a metal magnetic memory method[J]. Chemical & Petroleum Engineering, 2012, 47(11/12):837-839.
【4】YANG L J, LIU B, CHEN L J, et al. The quantitative interpretation by measurement using the magnetic memory method (MMM)-based on density functional theory[J].Ndt & E International, 2013, 55(3):15-20.
【5】任吉林,林俊明,任文坚.金属磁记忆检测技术研究现状与发展前景[J].无损检测,2012, 34(4):3-10.
【6】任吉林,王振,饶琪,等.新型磁记忆检测仪器[J]. 无损检测,2013,35(4):70-74.
【7】任吉林,唐继红,邬冠华,等. 金属的磁记忆检测技术[J]. 无损检测,2001,23(4):154-156.
【8】黎连修.磁记忆技术若干问题讨论[C]//第十届全国无损检测大会论文集.南昌:中国机械工程学会,2013.
【9】任吉林,王进,范振中,等. 一种磁记忆检测定量分析的新方法[J]. 仪器仪表学报,2010,31(2):431-436.
【10】王丹,董世运,徐滨士,等.静载拉伸45钢材料的金属磁记忆信号分析[J].材料工程,2008(8):77-80.
【11】唐继红,潘强华,任吉林,等.静载拉伸下磁记忆信号磁记忆变化特征分析[J].仪器仪表学报,2011,32(2):336-340.
【12】孙玉江,樊建春,徐鹏谊. 基于磁记忆检测的钻具螺纹修扣前后应力集中程度的评价[J]. 无损检测, 2014,36(5):6-10.
【13】于敏, 缑瑞宾, 仇飞,等. 静载拉伸过程中Q235钢屈服行为与磁畸变关系研究[J]. 热加工工艺, 2017,46(10):90-93.
【2】DOUBOV A A. Screening of weld quality using the magnetic metal memory effect[J]. 1998, 41:196-199.
【3】DUBOV A A. Development of a metal magnetic memory method[J]. Chemical & Petroleum Engineering, 2012, 47(11/12):837-839.
【4】YANG L J, LIU B, CHEN L J, et al. The quantitative interpretation by measurement using the magnetic memory method (MMM)-based on density functional theory[J].Ndt & E International, 2013, 55(3):15-20.
【5】任吉林,林俊明,任文坚.金属磁记忆检测技术研究现状与发展前景[J].无损检测,2012, 34(4):3-10.
【6】任吉林,王振,饶琪,等.新型磁记忆检测仪器[J]. 无损检测,2013,35(4):70-74.
【7】任吉林,唐继红,邬冠华,等. 金属的磁记忆检测技术[J]. 无损检测,2001,23(4):154-156.
【8】黎连修.磁记忆技术若干问题讨论[C]//第十届全国无损检测大会论文集.南昌:中国机械工程学会,2013.
【9】任吉林,王进,范振中,等. 一种磁记忆检测定量分析的新方法[J]. 仪器仪表学报,2010,31(2):431-436.
【10】王丹,董世运,徐滨士,等.静载拉伸45钢材料的金属磁记忆信号分析[J].材料工程,2008(8):77-80.
【11】唐继红,潘强华,任吉林,等.静载拉伸下磁记忆信号磁记忆变化特征分析[J].仪器仪表学报,2011,32(2):336-340.
【12】孙玉江,樊建春,徐鹏谊. 基于磁记忆检测的钻具螺纹修扣前后应力集中程度的评价[J]. 无损检测, 2014,36(5):6-10.
【13】于敏, 缑瑞宾, 仇飞,等. 静载拉伸过程中Q235钢屈服行为与磁畸变关系研究[J]. 热加工工艺, 2017,46(10):90-93.
相关信息