Application Analysis on Room Temperature Tensile Test Standard of GB/T 228.1-2010
摘 要
分析了室温拉伸试验标准GB/T 228.1-2010相比上版标准GB/T 228-2002在拉伸试样、试验机及性能控制要求等方面的变化,详细解析了新版标准中对抗拉强度、屈服强度规定及要求的一些变化以及工程应用中需要注意的事项,并对伸长和延伸进行了区分,对新旧标准中的一些概念进行了对比。
Abstract
The changes of tensile specimens, testing machines and their performance control requirements were compared between the room temperature tensile test standard of GB/T 228.1-2010 and its previous version GB/T 228-2002. Some changes of regulations and requirements of the new version standard on the tensile strength and yield strength, as well as the matters needing attention in engineering application were analyzed in detail. A distinction was made between extension and elongation, and some concepts in the new and old standards were compared.
中图分类号 T652.1 DOI 10.11973/lhjy-wl201802009
所属栏目 标准化
基金项目
收稿日期 2017/1/12
修改稿日期
网络出版日期
作者单位点击查看
备注程晓宇(1968-),男,教授,主要从事工程材料等方面教学研究,cxy11125@sina.com
引用该论文: CHENG Xiaoyu. Application Analysis on Room Temperature Tensile Test Standard of GB/T 228.1-2010[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2018, 54(2): 122~124
程晓宇. 室温拉伸试验标准GB/T 228.1-2010应用解析[J]. 理化检验-物理分册, 2018, 54(2): 122~124
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】GB/T 228.1-2010金属材料拉伸试验第1部分:室温试验方法[S].
【2】刘波,黄晓艳,赵尚. 2010版金属材料室温拉伸试验标准的变化[J]. 上海金属,2013,35(1):46-49,53.
【3】王丽英. 拉伸试验速率应用的分析与探讨[J]. 理化检验(物理分册),2014, 50(4):235-238,245.
【4】董强,宰绍峰,孙建林,等. GB/T 228.1-2010中的拉伸试验速率及其控制[J]. 理化检验(物理分册),2011, 47(12):774-781.
【5】GB/T 10623-2008金属材料力学性能试验术语[S].
【6】GB/T 699-2015优质碳素结构钢[S].
【7】GB/T 7659-2010焊接结构用铸钢件[S].
【8】GB/T 11352-2009一般工程用铸造碳钢件[S].
【9】GB/T 1591-2008低合金高强度结构钢[S].
【10】GB/T 3077-2015合金结构钢[S].
【11】GB/T 700-2006碳素结构钢[S].
【2】刘波,黄晓艳,赵尚. 2010版金属材料室温拉伸试验标准的变化[J]. 上海金属,2013,35(1):46-49,53.
【3】王丽英. 拉伸试验速率应用的分析与探讨[J]. 理化检验(物理分册),2014, 50(4):235-238,245.
【4】董强,宰绍峰,孙建林,等. GB/T 228.1-2010中的拉伸试验速率及其控制[J]. 理化检验(物理分册),2011, 47(12):774-781.
【5】GB/T 10623-2008金属材料力学性能试验术语[S].
【6】GB/T 699-2015优质碳素结构钢[S].
【7】GB/T 7659-2010焊接结构用铸钢件[S].
【8】GB/T 11352-2009一般工程用铸造碳钢件[S].
【9】GB/T 1591-2008低合金高强度结构钢[S].
【10】GB/T 3077-2015合金结构钢[S].
【11】GB/T 700-2006碳素结构钢[S].
相关信息