Development of Dynamic and Static Load Test Rig for Escalator and Moving Walks and Revision Suggestions for GB 16899-2011
摘 要
采用电液伺服原理自行设计研发了一种自动扶梯和自动人行道动静载试验台,对该试验台的结构原理、主要技术参数以及技术特点进行了简单阐述;利用试验台依据GB 16899-2011进行了大量的试验。结果表明:该试验台具有速度快、精度高、自动化程度高等特点;现行的GB 16899-2011存在描述不当之处,对该标准中的不当条款提出了相应的修订建议。
Abstract
A dynamic and static load test rig for escalator and moving walks was designed and developed based on electro-hydraulic servo principle. The structure principle, main technical parameters and technical characteristics of the test rig were briefly described. According to GB 16899-2011, a lot of experiments were carried out with the the test rig. The results show that the test rig had the characteristics of high speed, high accuracy and high automation; and the current GB 16899-2011 had some misdescriptions, the corresponding amendments to the unsuitable provisions of the standard were proposed.
中图分类号 TH236 DOI 10.11973/lhjy-wl201805007
所属栏目 试验设备及应用
基金项目
收稿日期 2017/9/25
修改稿日期
网络出版日期
作者单位点击查看
备注宋学东(1962-),男,教授,主要从事动态力学和静态力学试验工作
引用该论文: SONG Xuedong,CHENG Yongquan. Development of Dynamic and Static Load Test Rig for Escalator and Moving Walks and Revision Suggestions for GB 16899-2011[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2018, 54(5): 336~338
宋学东,程永全. 自动扶梯和自动人行道动静载试验台的开发及对GB 16899-2011的修订建议[J]. 理化检验-物理分册, 2018, 54(5): 336~338
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】刘锡奎,刘东洋,邢箭. 《自动扶梯和自动人行道的安全第1部分:制造与安装》解读[M]. 北京:中国标准出版社,2012.
【2】殷之平. 结构疲劳与断裂[M]. 西安:西北工业大学出版社,2012.
【3】桂立丰,曹用涛. 机械工程材料测试手册:力学卷[M]. 沈阳:辽宁科学技术出版社,2001.
【2】殷之平. 结构疲劳与断裂[M]. 西安:西北工业大学出版社,2012.
【3】桂立丰,曹用涛. 机械工程材料测试手册:力学卷[M]. 沈阳:辽宁科学技术出版社,2001.
相关信息
标题 | 相关频次 | |
电液伺服动态试验技术与电液伺服动态试验机 | 2 | |
高强度螺栓抗滑移系数的检测方法 | 2 | |
转向柱管承载能力的试验研究 | 1 |