Corrosion Control Design for Conventional Weapon Equipment
摘 要
根据常规武器装备的结构特点及使用、贮存环境条件,简述了腐蚀对其危害;阐明了对常规武器装备进行腐蚀控制设计的重要性、必要性。依据多年武器装备腐蚀控制设计经验,从装备的全寿命期出发,总结了武器装备腐蚀控制设计的基本步骤和内容,绘制了武器装备全寿命期的腐蚀控制设计示意图,对武器装备腐蚀控制设计的系统化、规范化及提高防腐蚀水平、减少损失都具有重要意义。
Abstract
According to the structural characteristics of conventional weapon equipment under use and storage conditions, the harm of corrosion to weapon equipment is briefly described. The importance and necessity of corrosion control design for weapon equipment are expounded. Based on years of experience in corrosion control design for weapon equipment and considering the full life of weapon equipment, the basic steps and contents of corrosion control design for weapon equipment are summarized, and the sketch map of full life corrosion control design for weapon equipment is drawn, which is of great significance for the systematic and standardized design of corrosion control for weapon equipment, as well as for the improvement of corrosion protection level and reduction of losses.
中图分类号 TG174 DOI 10.11973/fsyfh-201806013
所属栏目 应用技术
基金项目
收稿日期 2016/11/25
修改稿日期
网络出版日期
作者单位点击查看
引用该论文: PANG Liuyang. Corrosion Control Design for Conventional Weapon Equipment[J]. Corrosion & Protection, 2018, 39(6): 474
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】李金桂. 腐蚀控制系统工程学概论[M]. 北京:化学工业出版社,2009:3-4.
【2】初世宪,王洪仁. 工程防腐蚀指南[M]. 北京:化学工业出版社,2006:213-215.
【3】庞留洋. 兵器装备腐蚀试验研究[J]. 国防制造技术,2011(4):46-47.
【4】庞留洋. 兵器装备常见腐蚀形态分析[J]. 国防技术基础,2010(5):56-57.
【5】刘道新. 材料的腐蚀与防护[M]. 西安:西北工业大学出版社,2006:386-387.
【2】初世宪,王洪仁. 工程防腐蚀指南[M]. 北京:化学工业出版社,2006:213-215.
【3】庞留洋. 兵器装备腐蚀试验研究[J]. 国防制造技术,2011(4):46-47.
【4】庞留洋. 兵器装备常见腐蚀形态分析[J]. 国防技术基础,2010(5):56-57.
【5】刘道新. 材料的腐蚀与防护[M]. 西安:西北工业大学出版社,2006:386-387.
相关信息
标题 | 相关频次 | |
钢铝复合构件的磷化 | 1 |