Effects of Flame Correction Temperature on Structure and Properties of SA-213TP347H Stainless Steel Tube
摘 要
通过改变火焰矫正温度,从火焰矫正后钢管的硬度、显微组织以及析出相三个方面研究了火焰矫正温度对SA-213TP347H不锈钢管组织和性能的影响。结果表明:火焰矫正温度愈高,矫正后钢管的硬度则愈低;不锈钢管在火焰矫正过程中没有发生相变,始终是单相奥氏体,但矫正温度过高容易产生晶粒长大、过热甚至过烧。
Abstract
By changing the flame correction temperature, the effects of flame correction temperature on structure and properties of SA-213TP347H stainless steel tube were studied from the aspects of hardness, microstructure and precipitated phases. The results show that the higher the flame correction temperature was, the lower the hardness of the steel tube was after flame correction. The stainless steel tube didn't undergo phase change during the flame correction, and the microstructure was always single-phase austenite. If the flame correction temperature was too high, the stainless steel tube was prone to grain growth, overheating or even burning.
中图分类号 TG157 DOI 10.11973/syyj-wl201806003
所属栏目 试验与研究
基金项目
收稿日期 2017/7/3
修改稿日期
网络出版日期
作者单位点击查看
备注李金明(1985-),男,工程师,学士,主要从事锅炉及压力容器材料及产品的理化检验工作,373917982@qq.com
引用该论文: LI Jinming,TAN Shuping. Effects of Flame Correction Temperature on Structure and Properties of SA-213TP347H Stainless Steel Tube[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2018, 54(6): 395~397
李金明,谭舒平. 火焰矫正温度对SA-213TP347H不锈钢管组织和性能的影响[J]. 理化检验-物理分册, 2018, 54(6): 395~397
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】于岩,马清波,陈增有,等. 热矫正对Q345E低合金钢焊接接头疲劳性能的影响[J]. 热加工工艺,2015(3):38-40,44.
【2】杨涤心,孙远方. 火焰矫正温度对低合金高强钢焊件组织及性能的影响[J]. 金属热处理,2011,36(8):29-33.
【3】吴安,李晋. 670 t/h锅炉屏式过热器爆管原因分析及其解决方案[J]. 动力工程,2003,23(6):2761-2768.
【4】张磊,廉根宽. 电站锅炉四管泄漏分析与治理[M]. 北京:中国水利水电出版社,2009.
【2】杨涤心,孙远方. 火焰矫正温度对低合金高强钢焊件组织及性能的影响[J]. 金属热处理,2011,36(8):29-33.
【3】吴安,李晋. 670 t/h锅炉屏式过热器爆管原因分析及其解决方案[J]. 动力工程,2003,23(6):2761-2768.
【4】张磊,廉根宽. 电站锅炉四管泄漏分析与治理[M]. 北京:中国水利水电出版社,2009.
相关信息