钢丝绳整绳破断力测定方法国际标准ISO 3108:2017的修定过程及技术改进
Revision Process and Technical Improvement of International Standard ISO 3108:2017 for Determining the Measured Breaking Force of Steel Wire Ropes
摘 要
从钢丝绳检验工作的实际出发，指出了ISO 3108：1974中存在的问题，介绍了钢丝绳整绳破断力测定方法国际标准ISO 3108：2017从提出修订案到完成标准修订并出版的历程，以及ISO 3108：2017的技术改进。ISO 3108：2017的完成对中国钢丝绳产品质量的提升具有积极作用，同时提升了中国在国际钢丝绳检测领域的影响力和话语权。
破断力
试验方法
国际标准
标准修订
技术改进
steel wire rope
breaking force
test method
international standard
standard revision
technical improvement
Abstract
From the actual conditions of steel wire rope test work, the problems existing in ISO 3108:1974 were pointed out. The revision process of the international standard ISO 3108:2017 for determining the measured breaking force of steel wire ropes, was introduced from proposing revision plan to completing revision and publishing the new standard, as well as the technical improvements of the new standard were described. The completion of ISO 3108:2017 had a positive effect on the improvement of the quality of Chinese steel wire rope products, and at the same time it enhanced the influence and discourse power of China in the field of international wire rope testing.
中图分类号 TG141 DOI 10.11973/lhjy-wl201806007
所属栏目 标准化
基金项目 上海出入境检验检疫局标准科研资助项目（标外2016-016）
收稿日期 2018/1/16
修改稿日期
网络出版日期
作者单位点击查看
备注吴益文(1967-),男,研究员级高工,主要从事金属材料的检测技术与标准化研究工作,wuyw@shciq.gov.cn
引用该论文: WU Yiwen. Revision Process and Technical Improvement of International Standard ISO 3108:2017 for Determining the Measured Breaking Force of Steel Wire Ropes[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2018, 54(6): 418～420
吴益文. 钢丝绳整绳破断力测定方法国际标准ISO 3108:2017的修定过程及技术改进[J]. 理化检验－物理分册, 2018, 54(6): 418～420
共有人对该论文发表了看法，其中：
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】徐涛,徐臻,黄志伟,等. 钢丝绳外观缺陷对其力学性能影响的研究[J]. 物理测试,2011,29(2):39-44.
【2】吴益文,黄志伟,沈宏,等. 钢丝绳整绳破断试验影响因素探讨[J]. 物理测试,2011,29(2):23-25.
【3】巴发海,李玲. 港口桥吊用钢丝绳断丝分析[J]. 机械工程材料,2010,33(12):90-93.
【4】吴伟. 钢丝绳整绳破断力新旧国家标准的对比分析[J]. 理化检验(物理分册),2016,52(9):610-613.
【5】ISO 17558:2006 Steel wire ropes—Socketing procedures—Molten metal and resin socketing[S].
【6】ISO 17893:2004 Steel wire ropes—Vocabulary, designation and classification[S].
【7】ISO 7500-1:2015 Metallic materials—Calibration and verification of static uniaxial testing machines—Part 1: Tension/compression testing machines—Calibration and verification of the force-measuring system[S].
【2】吴益文,黄志伟,沈宏,等. 钢丝绳整绳破断试验影响因素探讨[J]. 物理测试,2011,29(2):23-25.
【3】巴发海,李玲. 港口桥吊用钢丝绳断丝分析[J]. 机械工程材料,2010,33(12):90-93.
【4】吴伟. 钢丝绳整绳破断力新旧国家标准的对比分析[J]. 理化检验(物理分册),2016,52(9):610-613.
【5】ISO 17558:2006 Steel wire ropes—Socketing procedures—Molten metal and resin socketing[S].
【6】ISO 17893:2004 Steel wire ropes—Vocabulary, designation and classification[S].
【7】ISO 7500-1:2015 Metallic materials—Calibration and verification of static uniaxial testing machines—Part 1: Tension/compression testing machines—Calibration and verification of the force-measuring system[S].
相关信息
