Application of Nonlinear Ultrasonic Testing Technology in Early Mechanical Property Test of T700 Carbon Fiber Composite Materials
摘 要
对T700型碳纤维复合材料板进行轴向静力拉伸试验,采用非线性超声检测技术,研究其在不同拉力作用下测得的非线性系数和衰减系数的变化规律。结果表明:随着拉力的增大,非线性系数和衰减系数都有一定程度地增加;相比衰减系数,非线性系数的变化趋势更加明显,说明非线性超声检测技术对于碳纤维复合材料早期力学性能测试方面有较强的适用性。
Abstract
The axial static tensile test of T700 carbon fiber composite materials was carried out, and the nonlinear ultrasonic testing technology was used to study the change rule of the nonlinear coefficient and attenuation coefficient under different tensile forces. The results show that the nonlinear coefficient and attenuation coefficient increased to a certain extent with the increase of tensile force. Compared with attenuation coefficient, the change trend of nonlinear coefficient was more obvious, which showed that the nonlinear ultrasonic testing technology had strong applicability to the early mechanical properties test of carbon fiber composite materials.
中图分类号 TB551 DOI 10.11973/lhjy-wl201807005
所属栏目 试验技术与方法
基金项目 省自然科学基金资助项目(E2016012)
收稿日期 2017/11/15
修改稿日期
网络出版日期
作者单位点击查看
备注李伟(1970-),男,教授,博士,主要从事声发射检测与评价和现代检测技术的研究,liweidqpi@163.com
引用该论文: LI Wei,HUANG Yuanhang,LIU Xin,JIANG Peng,MA Yundong,SUN He. Application of Nonlinear Ultrasonic Testing Technology in Early Mechanical Property Test of T700 Carbon Fiber Composite Materials[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2018, 54(7): 487~491
李伟,黄远航,刘鑫,蒋鹏,马云栋,孙贺. 非线性超声检测技术在T700型碳纤维复合材料早期力学性能测试方面的应用[J]. 理化检验-物理分册, 2018, 54(7): 487~491
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】郑晓玲. 民机结构耐久性与损伤容限设计手册(上册):疲劳设计与分析[M]. 北京:航空工业出版社,2003.
【2】WU F,YAO W. A fatigue damage model of composite materials[J]. International Journal of Fatigue,2010,32(1):134-138.
【3】张兆峰,李想,李仙会. 环境温度对聚氨酯弹性体/环氧复合板力学性能的影响[J]. 理化检验(物理分册),2015,51(5):312-314,319.
【4】李旺明,刘晴岩,张建华. 奥氏体不锈钢管母材和焊缝的显微组织对超声检测的影响[J]. 理化检验(物理分册),2015,51(1):22-26.
【5】吴斌,颜丙生,何存富,等. AZ31镁合金早期力学性能退化非线性超声检测[J]. 航空材料学报,2011,31(1):87-92.
【6】王旭. 超声非线性测试系统性能研究及信号提取方法[D]. 南昌:南昌航空大学,2014.
【7】周正干,刘斯明. 铝合金初期塑性变形与疲劳损伤的非线性超声无损评价方法[J]. 机械工程学报,2011,47(8):41-46.
【8】税国双,汪越胜,曲建民. 材料力学性能退化的超声无损检测与评价[J]. 力学进展,2005,35(1):52-68.
【9】陆铭慧,林娜. RTM/纺织复合材料孔隙率非线性超声方法研究[J]. 航空制造技术,2013(5):89-93.
【10】张剑锋,轩福贞,项延训. 材料损伤的非线性超声评价研究进展[J]. 科学通报,2016,61(14):1536-1550.
【11】DENG M. Analysis of second-harmonic generation of Lamb modes using a modal analysis approach[J]. Journal of Applied Physics,2003,94(6):4152-4159.
【12】KOEN E A, VAN DEN ABEELE K, SUTIN A, et al. Micro-damage diagnostics using nonlinear elastic wave spectroscopy (NEWS)[J]. NDT and E International,2001,34(4):239-248.
【2】WU F,YAO W. A fatigue damage model of composite materials[J]. International Journal of Fatigue,2010,32(1):134-138.
【3】张兆峰,李想,李仙会. 环境温度对聚氨酯弹性体/环氧复合板力学性能的影响[J]. 理化检验(物理分册),2015,51(5):312-314,319.
【4】李旺明,刘晴岩,张建华. 奥氏体不锈钢管母材和焊缝的显微组织对超声检测的影响[J]. 理化检验(物理分册),2015,51(1):22-26.
【5】吴斌,颜丙生,何存富,等. AZ31镁合金早期力学性能退化非线性超声检测[J]. 航空材料学报,2011,31(1):87-92.
【6】王旭. 超声非线性测试系统性能研究及信号提取方法[D]. 南昌:南昌航空大学,2014.
【7】周正干,刘斯明. 铝合金初期塑性变形与疲劳损伤的非线性超声无损评价方法[J]. 机械工程学报,2011,47(8):41-46.
【8】税国双,汪越胜,曲建民. 材料力学性能退化的超声无损检测与评价[J]. 力学进展,2005,35(1):52-68.
【9】陆铭慧,林娜. RTM/纺织复合材料孔隙率非线性超声方法研究[J]. 航空制造技术,2013(5):89-93.
【10】张剑锋,轩福贞,项延训. 材料损伤的非线性超声评价研究进展[J]. 科学通报,2016,61(14):1536-1550.
【11】DENG M. Analysis of second-harmonic generation of Lamb modes using a modal analysis approach[J]. Journal of Applied Physics,2003,94(6):4152-4159.
【12】KOEN E A, VAN DEN ABEELE K, SUTIN A, et al. Micro-damage diagnostics using nonlinear elastic wave spectroscopy (NEWS)[J]. NDT and E International,2001,34(4):239-248.
相关信息