搜索热:失效分析 陶瓷
扫一扫 加微信
首页 > 期刊论文 > 论文摘要
基于Z-A模型的GH4169高温合金动态本构关系
          
Dynamic Constitutive Relation of GH4169 Superalloy Based on Z-A Model

摘    要
采用分离式霍普金森压杆试验研究了GH4169高温合金在温度20~400℃和应变速率1 000~3 000 s-1时的流变应力-应变曲线,利用Zerilli-Armstrong(Z-A)本构模型描述了流变应力与应变的关系,确定了本构模型的参数,并对该模型进行试验验证。结果表明:GH4169高温合金存在明显的应变速率强化效应和温度软化效应,流变应力和应变呈近线性关系;所建立的Z-A本构模型能够准确地描述GH4169高温合金在不同温度和不同应变速率下的流变行为,其平均相对误差的平均值为2.65%。
标    签 GH4169高温合金   Zerilli-Armstrong本构模型   应变速率强化效应   温度软化效应   GH4169 superalloy   Zerllli-Armstrong constitutive model   strain rate strengthening effect   temperature softening effect  
 
Abstract
The flow stress-strain curves of GH4169 superalloy at the temperatures of 20-400℃ and strain rates of 1 000-3 000 s-1 were studied by split Hopkinson bar test. The relationship between stress and strain was described by Zerilli-Armstrong (Z-A) constitutive model, the parameters of constitutive model were determined, and the model was verified by experiments. The results show that GH4169 superalloy had obvious strain rate strengthening effect and temperature softening effect. The relationship between flow stress and strain was nearly linear. The established Z-A constitutive model accurately described the rheological behavior of GH4169 superalloy at different temperatures and different strain rates, and the average value of average relative errors of the model was 2.65%.

中图分类号 V252   DOI 10.11973/jxgccl201808014

 
  中国光学期刊网论文下载说明


所属栏目 物理模拟与数值模拟

基金项目 国家自然科学基金资助项目(51301090);中央高校基本科研业务费专项资金资助项目(NS2016029)

收稿日期 2017/6/5

修改稿日期 2018/5/11

网络出版日期

作者单位点击查看

备注邹品(1991-),男,湖北荆州人,硕士研究生

引用该论文: ZOU Pin,ZHAO Zhenhua,YAN Huansong,KONG Zukai,LIU Lulu,GUAN Yupu,CHEN Wei. Dynamic Constitutive Relation of GH4169 Superalloy Based on Z-A Model[J]. Materials for mechancial engineering, 2018, 42(8): 67~71
邹品,赵振华,闫欢松,孔祖开,刘璐璐,关玉璞,陈伟. 基于Z-A模型的GH4169高温合金动态本构关系[J]. 机械工程材料, 2018, 42(8): 67~71


论文评价
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
分享论文
分享到新浪微博 分享到腾讯微博 分享到人人网 分享到 Google Reader 分享到百度搜藏分享到Twitter

参考文献
【1】KONG X W, LI B, JIN Z B, et al. Broaching performance of superalloy GH4169 based on FEM[J]. Journal of Materials Science and Technology, 2011, 27(12):1178-1184.
 
【2】《中国航空材料手册》编辑委员会.航空工程材料手册[M]. 北京:中国标准出版社,2002:232-359.
 
【3】WANG Z T, ZHANG S H, CHENG M, et al. Kinematics and dynamics model of GH4169 alloy for thermal deformation[J]. Journal of Iron and Steel Research (International), 2010,17(7):75-78.
 
【4】SARKAR S, ATLURI S N. Effects of multiple blade interaction on the containment of blade fragments during a rotor failure[J]. Finite Elements in Analysis and Design, 1996, 23(2/3/4):211-223.
 
【5】宣海军,陆晓,洪伟荣,等. 航空发动机机匣包容性研究综述[J]. 航空动力学报,2010, 25(8):1860-1870.
 
【6】SHOCKEY D A, SIMONS J W, BROWN C S, et al. Shear failure of Inconel 718 under dynamic loads[J]. Experimental Mechanics, 2007, 47(6):723-732.
 
【7】KOBAYASHI T, SIMONS J W, BROWN C S, et al. Plastic flow behavior of Inconel 718 under dynamic shear loads[J]. International Journal of Impact Engineering, 2008, 35(5):389-396.
 
【8】LEE W S, LIN C F, CHEN T H, et al. Dynamic mechanical behavior and dislocation substructure evolution of Inconel 718 over wide temperature range[J].Materials Science & Engineering:A, 2011, 528(19/20):385-390.
 
【9】陈弘伟.镍基718超合金在不同温度下之撞击特性及微观结构分析[D].台南:国立成功大学,2009.
 
【10】WANG Y, SHAO W Z, ZHEN L, et al. Flow behavior and microstructures of superalloy 718 during high temperature deformation[J]. Materials Science & Engineering:A, 2008, 497(1/2):479-486.
 
【11】常鹏鹏,孔永华,陈国盛,等.GH4169合金的高温应力松弛行为及蠕变本构方程[J].机械工程材料,2015,39(5):89-92.
 
【12】THOMAS A, EI-WAHABI M, CABRERA J M, et al. High temperature deformation of Inconel 718[J]. Journal of Materials Processing Technology,2006,177(1/2/3):469-472.
 
【13】ERICE B,GALVEZ F. An experimental and numerical study of ductile failure under quasi-static and impact loadings of Inconel 718 nickel-base superalloy[J]. International Journal of Impact Engineering, 2014, 69(7):11-24.
 
【14】WANG X, HUANG C, ZOU B, et al. Dynamic behavior and a modified Johnson-Cook constitutive model of model of Inconel 718 at high strain rate and elevated temperature[J].Materials Science & Engineering:A,2013,580(37):385-390.
 
相关信息
   标题 相关频次
 GH4169高温合金的动态力学行为及其本构关系
 11
 湿热老化对T700/TDE-85复合材料层间剪切强度的影响
 8
 基于J-C模型的GH907高温合金动态本构关系及失效关系
 7
 TC8钛合金的动态力学性能及本构关系
 6
 2Cr13不锈钢在含乙酸的CO2饱和的NaCl溶液中的腐蚀行为
 2
 350 MW亚临界机组T91钢再热器管泄漏失效分析
 2
 BTi6431S高温钛合金盒形件超塑性成型工艺
 2
 GH4169镍基高温合金的热变形行为与再结晶模型
 2
 H型钢空冷过程中残余热应力的有限元分析
 2
 LY12M铝合金板同步冷却热拉伸后的组织与性能
 2
 Q345R钢在含单质硫地层水中的腐蚀行为
 2
 不同冷速下GH4169高温合金凝固过程的原位观察
 2
 不同温度淬火对45钢疲劳裂纹扩展行为的影响
 2
 镀锌钢管在流动地热水环境中的腐蚀与结垢
 2
 高效液相色谱-串联质谱法测定减肥保健食品中违禁添加药物利莫那班
 2
 环氧玻璃鳞片涂层在塔河油田的腐蚀行为
 2
 基于等声程聚焦算法的超声相控阵检测技术
 2
 基于电化学交流阻抗技术的DNA生物传感器对军团菌基因检测
 2
 基于小波变换的相控阵全聚焦图像去噪
 2
 金属材料弹性模量的仪器化压入测试
 2
 均匀化处理对铝锌镁钪合金组织和性能的影响
 2
 气相色谱法测定建筑用粘接剂中6种磷酸酯的含量
 2
 气相色谱-质谱法测定纺织品中22种农药残留
 2
 热处理前后镍基高温合金激光熔覆层的组织和力学性能
 2
 热轧钢管用限动芯棒表面失效形貌分析
 2
 速率控制模式对GH4169高温合金拉伸性能的影响
 2
 相控阵三维全聚焦成像检测技术
 2
 血迹的光度法测定及其在物证分析中应用
 2
 亚温淬火45钢的断裂韧度试验
 2
 油管聚乙烯内衬在高温高压H2S环境中的适用性
 2