Ultrasonic Testing of Anaerobic Adhesive Coating Quality of Fuel Pump Volute Casing Components
摘 要
为了避免蜗壳组件在使用过程中因厌氧胶涂覆品质的不良而引发碰磨故障的问题,提出了采用超声特征扫描技术对厌氧胶涂覆品质进行检测。设计制作了5个蜗壳组件试样,在完成对试样的检测后,使用超声回波的幅值特征进行成像显示,并利用软件的统计功能对厌氧胶的涂覆品质进行评估。结果表明,利用超声特征扫描成像系统能够有效检测蜗壳组件厌氧胶的涂覆品质。
Abstract
In order to avoid rub and impact caused by the poor thread adhesive coating quality in the use of volute casing components, a method of nondestructive testing on the thread joint surface based on the ultrasonic feature scanning was proposed. Five volute casing components samples were designed and manufactured. After the test of the sample was finished, the amplitude characteristic of the ultrasonic echo was used for imaging and the thread adhesive coating quality was evaluated by using the statistical function of the software. The experimental result indicated that the ultrasonic feature scan imaging system can be used to detect the thread adhesive coating quality of volute casing components effectively.
中图分类号 TG115.28 DOI 10.11973/wsjc201809001
所属栏目 试验研究
基金项目
收稿日期 2018/1/30
修改稿日期
网络出版日期
作者单位点击查看
备注刘勋丰(1958-),男,高级工程师,主要研究方向为超声检测
引用该论文: LIU Xunfeng,LUO Xuefeng,JIANG Hao,QIU Chuanqi. Ultrasonic Testing of Anaerobic Adhesive Coating Quality of Fuel Pump Volute Casing Components[J]. Nondestructive Testing, 2018, 40(9): 1~4
刘勋丰,罗雪峰,江浩,邱传琦. 燃油泵蜗壳组件厌氧胶涂覆品质的超声检测[J]. 无损检测, 2018, 40(9): 1~4
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】王兢.军用发动机控制系统技术分析及改进研究[J].国防科技,2014,35(3):36-39.
【2】张绍基.航空发动机控制系统的研发与展望[J].航空动力学报,2004,19(3):375-382.
【3】陆铭慧,冯君伟,刘勋丰,等.CFRP夹层结构超声特征成像检测[J].宇航材料工艺,2017,47(3):75-78.
【4】SAMBATH S,NAGARAJ P,SELVAKUMAR N,et al.Automatic detection of defects in ultrasonic testing using artificial neural network[J].International Journal of Microstructure and Materials Properties,2010,5(6):561-574.
【5】XIE X,QUAN H,LI Z,et al.Detecting impact damage in carbon fabric/epoxy-matrix composites by ultrasonic F-scan and electrical resistance measurement[J].Journal of Wuhan University of Technology-Mater.Sci.Ed.,2010,25(2):214-217.
【6】陆铭慧,王俊东,张毅萍,等.RTM碳纤维复合材料宏观缺陷超声表征及分析[J].玻璃钢/复合材料,2017(4):70-74.
【2】张绍基.航空发动机控制系统的研发与展望[J].航空动力学报,2004,19(3):375-382.
【3】陆铭慧,冯君伟,刘勋丰,等.CFRP夹层结构超声特征成像检测[J].宇航材料工艺,2017,47(3):75-78.
【4】SAMBATH S,NAGARAJ P,SELVAKUMAR N,et al.Automatic detection of defects in ultrasonic testing using artificial neural network[J].International Journal of Microstructure and Materials Properties,2010,5(6):561-574.
【5】XIE X,QUAN H,LI Z,et al.Detecting impact damage in carbon fabric/epoxy-matrix composites by ultrasonic F-scan and electrical resistance measurement[J].Journal of Wuhan University of Technology-Mater.Sci.Ed.,2010,25(2):214-217.
【6】陆铭慧,王俊东,张毅萍,等.RTM碳纤维复合材料宏观缺陷超声表征及分析[J].玻璃钢/复合材料,2017(4):70-74.
相关信息