Testing the Aging Resistance of Plastic Films by Uniform Design Method
摘 要
利用均匀设计法,研究了人工老化环境(温度和光辐照度)对不同配方地膜耐老化性能的影响。结果表明:采用均匀设计法,仅通过5次试验即得到了人工紫外线老化环境变化对地膜产品耐老化性能的影响规律;光辐照度是不添加抗老化剂地膜老化的主要影响因素,光辐照度越高,则地膜力学性能下降越严重;光照温度是添加抗老化剂地膜老化的主要影响因素,光照温度越高,地膜耐老化性能越差。
Abstract
The influence of artificial aging environment (temperature and light irradiance) on ageing resistance performance of different formulation plastic films was studied by uniform design method. The results show that using uniform design method, the effect of the change of artificial ultraviolet aging environment on the aging resistance of plastic film products was obtained through 5 tests. Light irradiance was the main influencing factor of plastic films aging without adding anti-aging agent. The higher the light irradiance, the more serious the mechanical properties of plastic films will decrease. Illumination temperature was the main influencing factor to increase the aging of plastic films with anti-aging agent. The higher the illumination temperature, the worse the aging resistance of the plastic films.
中图分类号 TQ327.7 DOI 10.11973/lhjy-wl201811002
所属栏目 试验与研究
基金项目
收稿日期 2018/1/3
修改稿日期
网络出版日期
作者单位点击查看
备注关莉(1972-),女,高级工程师,主要从事树脂评价和研究工作,guanli@petrochina.com.cn
引用该论文: GUAN Li,ZHU Jun,MIAO Jiang. Testing the Aging Resistance of Plastic Films by Uniform Design Method[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2018, 54(11): 790~793
关莉,朱军,缪江. 采用均匀设计法测试地膜耐老化性能[J]. 理化检验-物理分册, 2018, 54(11): 790~793
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】ELSAYED M,ABDEL B. 塑料薄膜手册[M]. 北京:化学工业出版社,2006.
【2】高红旭,赵凤起,李上文. 用均匀设计和回归分析法研究燃烧催化剂的作用规律[J]. 兵工学报,2007,28(2):158-162.
【3】张兆峰,李想,李仙会. 环境温度对聚氨酯弹性体/环氧复合板力学性能的影响[J]. 理化检验(物理分册),2015,51(5):312-314.
【4】单演炎,刘毅,吴晓丽,等. 光伏背板老化性能的快速试验方法[J]. 理化检验(物理分册),2016,52(11):774-777.
【5】马进,林正宙. 均匀设计法优化聚乙烯瓦斯抽排放管专用料配方[J]. 上海塑料,2010(2):22-27.
【2】高红旭,赵凤起,李上文. 用均匀设计和回归分析法研究燃烧催化剂的作用规律[J]. 兵工学报,2007,28(2):158-162.
【3】张兆峰,李想,李仙会. 环境温度对聚氨酯弹性体/环氧复合板力学性能的影响[J]. 理化检验(物理分册),2015,51(5):312-314.
【4】单演炎,刘毅,吴晓丽,等. 光伏背板老化性能的快速试验方法[J]. 理化检验(物理分册),2016,52(11):774-777.
【5】马进,林正宙. 均匀设计法优化聚乙烯瓦斯抽排放管专用料配方[J]. 上海塑料,2010(2):22-27.
相关信息