Improvement of Strength and Toughness of Wind Power Spindles
摘 要
针对某公司风电主轴产品强韧性性能测试结果存在不合格风险的问题,对该产品进行了成分分析、性能检验、金相检验等一系列的理化检验,并分析了得到的检验数据结果,着重对有效提高产品强韧性的措施进行了分析与讨论,综合考虑用户需求和经济效益等因素,最终决定调整产品原材料的成分含量,在原本的42CrMo4钢成分中加入质量分数为0.15%~0.20%的钒元素。结果表明:钒元素在钢中可以起到细晶强化和弥散强化的作用,使得该风电主轴产品的强韧性得到提高,保证了产品的质量。
Abstract
Aiming at the problem of the unqualified risk of strength and toughness performance test results of a wind power spindle product of a company, a series of physical and chemical tests such as composition analysis, performance test and metallographic examination were carried out on the product, and the obtained test data results were analyzed. The measures to effectively improve the strength and toughness of the product were analyzed and discussed. Comprehensively considering the user's needs and economic benefits, it was decided to adjust the composition contents of raw material of the product, and the vanadium element with a mass fraction of 0.15%~0.20% was added to the original 42CrMo4 steel compositions. The results show that the vanadium element can play the role of fine grain strengthening and dispersion strengthening in the steel, which improves the strength and toughness of the wind power spindle product and ensures the quality of the product.
中图分类号 TG162.71 DOI 10.11973/lhjy-wl201902003
所属栏目 试验与研究
基金项目
收稿日期 2018/3/1
修改稿日期
网络出版日期
作者单位点击查看
备注史可庆(1991-),男,助理工程师,学士,主要从事材料理化检验工作,412584684@qq.com
引用该论文: SHI Keqing,LIU Zhe,DONG Shuangshuang,ZHAO Gang,SANG Xueke,BI Jinghua,WEI Di,REN Liqin,BI Xiao,LÜ,Shujie. Improvement of Strength and Toughness of Wind Power Spindles[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2019, 55(2): 84~88
史可庆,刘哲,董双双,赵刚,桑学科,毕京华,魏迪,任丽芹,毕啸,吕书杰. 风电主轴强韧性的提高[J]. 理化检验-物理分册, 2019, 55(2): 84~88
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】史可庆,刘哲,刘永超. 风电主轴冲击试验不合格原因分析[J]. 金属热处理,2018,43(6):237-240.
【2】吴玉兰. 风机主轴断裂原因分析[J]. 理化检验(物理分册),2005,41(2):99-100,104.
【3】张树. 钢强韧化的微观机制[J]. 兵器材料科学与工程,1987,10(4):21-28.
【4】杨宝森. 浅论提高超高强度钢强韧性的途径[J]. 上海金属(钢铁分册),1982(3):26-37.
【5】锡淦,席歆. 国外钒的应用概况[J]. 世界有色金属,2000(2):13-21.
【6】王亦工,冯运莉. V-N微合金化提高低合金结构钢强韧性研究[J]. 金属热处理,2005,30(9):27-30.
【7】周一志. 合金元素对钢的断裂韧性的影响[J]. 机械工程材料,1983(1):12-13.
【8】贺凯林,金丽萍. 40CrNiMo钢主轴断裂原因分析[J]. 理化检验(物理分册),2017,53(9):668-670.
【9】潘晓丽,朱健,王秉新. 390 MPa级低合金高强钢的低温韧性[J]. 理化检验(物理分册),2012,48(4):221-223.
【2】吴玉兰. 风机主轴断裂原因分析[J]. 理化检验(物理分册),2005,41(2):99-100,104.
【3】张树. 钢强韧化的微观机制[J]. 兵器材料科学与工程,1987,10(4):21-28.
【4】杨宝森. 浅论提高超高强度钢强韧性的途径[J]. 上海金属(钢铁分册),1982(3):26-37.
【5】锡淦,席歆. 国外钒的应用概况[J]. 世界有色金属,2000(2):13-21.
【6】王亦工,冯运莉. V-N微合金化提高低合金结构钢强韧性研究[J]. 金属热处理,2005,30(9):27-30.
【7】周一志. 合金元素对钢的断裂韧性的影响[J]. 机械工程材料,1983(1):12-13.
【8】贺凯林,金丽萍. 40CrNiMo钢主轴断裂原因分析[J]. 理化检验(物理分册),2017,53(9):668-670.
【9】潘晓丽,朱健,王秉新. 390 MPa级低合金高强钢的低温韧性[J]. 理化检验(物理分册),2012,48(4):221-223.
相关信息