Testing Methods of Pore Structure for Porous Tungsten
摘 要
采用3种不同粒度的钨粉经过成型、烧结,制备了不同孔隙率的多孔钨。使用排液法、压汞法、扫描电镜测试了多孔钨的孔结构特征。结果表明:排液法和压汞法结合可获得多孔钨总孔隙率、开孔率、孔径分布、闭孔率等孔结构参数,结合扫描电镜测试可对多孔钨的孔结构进行综合评价。
Abstract
Porous tungsten materials with different porosity were prepared by moulding and sintering of three kinds of tungsten powders with different particle sizes. The pore structure characteristics of porous tungsten were measured by drainage method, mercury intrusion method and scanning electron microscope analysis. The results show that the pore structure parameters of porous tungsten, such as total porosity, open porosity, pore size distribution and closed porosity, can be obtained by the combination of drainage method and mercury intrusion method. Combined with scanning electron microscope analysis, the porous tungsten porous structure can be comprehensively evaluated.
中图分类号 TF124 DOI 10.11973/lhjy-wl201907005
所属栏目 试验技术与方法
基金项目
收稿日期 2018/8/3
修改稿日期
网络出版日期
作者单位点击查看
备注李曹兵(1980-),男,工程师,主要从事钨及钨合金材料制备与加工技术研究,licbing@163.com
引用该论文: LI Caobing,WANG Luyan,ZHOU Xiaobing. Testing Methods of Pore Structure for Porous Tungsten[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2019, 55(7): 451~454
李曹兵,王芦燕,周小彬. 多孔钨孔结构的测试方法[J]. 理化检验-物理分册, 2019, 55(7): 451~454
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】奚正平, 汤慧萍. 烧结金属多孔材料[M]. 北京:冶金工业出版社,2009.
【2】王力,邝用庚,张保红,等. 钨热阴极材料的研究进展[J]. 粉末冶金工业,2014,24(4):55-61.
【3】IRINA P M, VICTOR G V, DMITRY A U. Correlation of emission capability and longevity of dispenser cathodes with characteristics of tungsten powders[J]. Applied Surface Science,2003,215:59-64.
【4】丘可昂. 我国烧结金属过滤材料的研制应用与展望[J]. 稀有金属材料与工程,1991(3):10-15.
【5】张红卫. 微波管钡钨阴极制备和性能的研究[D]. 北京:中科院电子所,2003.
【6】李睿,秦明礼,陈鹏起,等. 金属注射成形制备多孔钨阴极基底[J]. 真空电子技术,2016(5):45-47.
【7】阴生毅,王宇,王欣欣. 钨粉分级及其在M型阴极上的应用[J]. 中国钨业,2010,25(2):31-33.
【2】王力,邝用庚,张保红,等. 钨热阴极材料的研究进展[J]. 粉末冶金工业,2014,24(4):55-61.
【3】IRINA P M, VICTOR G V, DMITRY A U. Correlation of emission capability and longevity of dispenser cathodes with characteristics of tungsten powders[J]. Applied Surface Science,2003,215:59-64.
【4】丘可昂. 我国烧结金属过滤材料的研制应用与展望[J]. 稀有金属材料与工程,1991(3):10-15.
【5】张红卫. 微波管钡钨阴极制备和性能的研究[D]. 北京:中科院电子所,2003.
【6】李睿,秦明礼,陈鹏起,等. 金属注射成形制备多孔钨阴极基底[J]. 真空电子技术,2016(5):45-47.
【7】阴生毅,王宇,王欣欣. 钨粉分级及其在M型阴极上的应用[J]. 中国钨业,2010,25(2):31-33.
相关信息